Check angles from 0 to 90 degrees. Accurate to 0.5 degree. Magnetically attaches for easier reading.

Modern formulation polyurethane torque arm bushing for factory style mount on 1982-2002 GM F-Body. Fits stamped W-blade factory torque arm.

This kit is highly recommended when installing an aftermarket torque arm to the Moser 12-bolt rear end. The Moser 12-Bolt rear end is supplied with four ½” mounting holes while most aftermarket torque arms are built with 5/8” mounting...

This TH400 transmission mount with drive haft safety loop comes with an added bushing mount to be used with our tunnel-mounted torque arm. It is the same mount supplied with our 2219 tunnel-mounted torque arm set-up. Purchase this if you already have our...

This 700R4 & T5 transmission mount with drive shaft safety loop comes with an added bushing mount to be used with our tunnel-mounted torque arm. It is the same mount supplied with our 2217 tunnel-mounted torque arm set-up. Purchase this if you...

This TH350 transmission mount with drive shaft safety loop comes with an added bushing mount to be used with our tunnel-mounted torque arm. It is the same mount supplied with our 2215 tunnel-mounted torque arm set-up. This mount will also work with the...

Compatible with UMI Part #’s: 2200, 2201, 2202, 2203, 2205, 2206, 2216, 2217, 2218, 2219 Will fit mild steel or chromoly versions

UMI's 2236 weld-in torque arm is a great way to get UMI quality and performance in your 3rd and 4th Gen F-body. The shortened torque arm length improves instant center and provides reduced 60 ft times and enhanced forward traction. The...

  Installing a TH400 (4 tail shaft) automatic transmission into your 82-92 Camaro or Firebird just got easier. This transmission cross-member with integrated torque arm mount features the correct provisions for mounting the TH400 transmission while...

  Installing a TH350 automatic transmission into your 82-92 Camaro or Firebird just got easier. This transmission cross-member with integrated torque arm mount features the correct provisions for mounting the TH350 transmission while still allowing...

The torque arm relocation kit from UMI Performance is designed to remove the front mounting point of the torque arm off the transmission and protect the tail shaft from damage. General Motors tail shaft mounted design works great for a stock driven...

This tunnel mounted torque arm is designed to work with a TH400 (Short tail Only) transmission installed into an 82-92 Camaro or Firebird. This item is supplied with a transmission crossmember with provisions to install a TH400 and a new shorter style...