1800+ RWHP capable return fuel system with efficient hose routing. The rails are in a series installation with the fuel pressure regulator AFTER the rails. We recommend this setup for centrifugal and turbo setups. 800-1800+ rwhp capacity, high end...

1800+ RWHP capable return fuel system made with top shelf components. The feed line enters our F4i regulator, then distribution lines feed to the rear of both fuel rails. 800-1800+ rwhp fuel system, discreet hose routing Fuel rails routed in...

Boost Referenced Return System for 800+ RWHP. Use with OEM fuel rails.   INCLUDES G8 Fuel Pump Module (dual pump) F1i Fuel Pressure Regulator 88mm Inline Fuel Filter FCV Checkvalve All fittings, hose, hardware required for typical fuel...

This is the exact size injector that came with the LS3 LS7 LS9 only these are 95lb/hr at 3 bar or 103lb/hr at 4 bar, High Impendance. (58 psi fuel pressure)   Each injector set is 100% matched. They have a MACHINE SS SINGLE TIP discharge...

Holley 200 GPH Dominator In-Line Billet Fuel Pump, Up to 1,800 HP EFI Street/Strip Carb or EFI Applications Supports up to 1800 EFI or 2100 Carb HP Compatible with Pump Gas*, Race Gas, Diesel or E85 Need to feed some serious horsepower? Have a...

80lb LS3 LS7 LS9 LSA 850cc Flow Matched Bosch Injectors, Set of 8   These are brand new Bosch EVI4 injectors.    80 lb Bosch EV14 High Impedance Genuine Bosch High Impedance Injectors    These injectors are modified...

These are ls3 short Bosch injectors that flow 72@3 bar  Brand new and exact fit, no spacers or wire adapters required.    Easy to tune as these are the same injector that came with the ls3 only modified that they flow more for head...

Brand new and flow matched stock ls3 ls7 fuel injector set set of 8   These flow 42lb@4bar

The FAST™ LSX™/LSXR™/LSXRT™ Fuel Rails feature a larger internal diameter that dampens the pulses and provides increased fuel volume, ensuring that your injectors never run dry. In addition, they yield better fuel distribution and...

The DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV/Gen V GM V8 vehicles.  Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true...

This is a GM Flex Fuel sensor with a custom made harness. This is ideal for people who don't need the plumbing side of things because they're using an aftermarket fuel system or just want to do things their own way.  When checking out, select...

  This pump is also compatible with E85 and other oxygenated fuels. PHOTO SHOWS OPTIONAL INSTALL KIT 400-1162 WHICH CAN BE ADDED FOR $58.46. TI Automotive Walbro TIA485-2 / F90000267 internal E85 HP RACING fuel pump plus Install kitThe innovative...