Product Description:
Hawks Motorsports is pleased to offer our clients the following E85 Electric In-Tank Dual Turbine Fuel Pump 465LPH by Walbro, part number F90000267.
When the build starts making serious power, the factory fuel pump usually becomes the weak link in a hurry. The Walbro/TI Automotive F90000267 is built for high-flow, high-pressure fuel systems and uses a dual-channel turbine design to keep fuel moving when the engine is asking for everything you've got. Whether you're building around gasoline or E85, this pump is made for combinations where fuel volume and pressure capacity are critical.
The F90000267, also identified as the TI Automotive TIA485-2, is an electric in-tank fuel pump designed for high-performance gasoline and E85/flex-fuel applications. Hawks lists this pump at 465 LPH at 40 PSI and 13.5V in gasoline, while current market references commonly identify the model as part of the Walbro/TI Automotive 450-485 LPH performance pump family. Flow ratings can vary depending on fuel, voltage, and operating pressure.
KEY FEATURES
- Walbro/TI Automotive F90000267
- Also identified as TIA485-2
- High-performance electric in-tank fuel pump
- Compatible with E85 and flex-fuel applications
- Dual-channel turbine pumping design
- High-flow, high-pressure fuel pump design
- Hawks-listed flow rating of 465 LPH at 40 PSI and 13.5V in gasoline
- Capable of operating up to 87 PSI total fuel pressure
- Designed for high-performance fuel systems
- 10mm / 3/8" outlet diameter
- Made in the USA by TI Automotive according to current product information
PRODUCT SPECIFICATIONS
| Specification | Details |
|---|---|
| Manufacturer | Walbro / TI Automotive |
| Current Part Number | F90000267 |
| TI Automotive Model | TIA485-2 |
| Product Type | Electric In-Tank Fuel Pump |
| Fuel Compatibility | Gasoline and E85/flex-fuel applications |
| Pump Design | Dual-channel turbine |
| Flow Rating | 465 LPH @ 40 PSI and 13.5V in gasoline |
| Maximum Operating Pressure | Up to 87 PSI total fuel pressure |
| Outlet Diameter | 10mm / 3/8" |
| Upper Body Diameter | 39mm |
| Lower Body Diameter | 50mm |
| Length | Approximately 130.6mm, based on specialist application data |
| Country of Manufacture | USA, according to current TI Automotive product information |
| Shipping Weight | Verification required |
| Shipping Dimensions | 4" W x 9" H x 4" D |
VEHICLE FITMENT / APPLICATION
Universal High-Performance Application
The Walbro/TI Automotive F90000267 is a universal-style in-tank performance fuel pump rather than a direct replacement assigned to one specific vehicle application.
Fitment depends on the vehicle's:
- Fuel tank and fuel module configuration
- Pump mounting dimensions
- Electrical system capacity
- Fuel line requirements
- Fuel pressure requirements
- Overall fuel system design
This pump may require vehicle-specific modifications for installation.
IMPORTANT APPLICATION NOTES AND EXCLUSIONS
Universal Application Does Not Mean Direct Fit
The F90000267 should not be represented as a direct bolt-in replacement for every vehicle. Installation compatibility depends on the specific fuel module and fuel system configuration.
E85-Compatible
This pump is designed for E85/flex-fuel applications and is also compatible with gasoline applications.
Flow Depends on Operating Conditions
Fuel pump output varies with voltage, fuel type, and system pressure. The 465 LPH specification should be understood as the Hawks-listed rating at 40 PSI and 13.5V in gasoline, not as a constant output under all operating conditions.
System Modifications May Be Required
The current Hawks product information states that installation may require modifications to the vehicle's wiring, fuel lines, and fuel module. Professional installation is recommended for complex high-performance fuel systems.
Part Number History
The older 400-0085 installation kit has been discontinued and replaced by 400-1168. This is installation-kit history and should not be confused with the fuel pump's current part number, F90000267.
INSTALLATION NOTES
- Verify that the fuel module can accept the F90000267 pump dimensions before installation.
- Confirm the vehicle's electrical system is capable of supporting the pump's current requirements.
- Inspect the complete fuel system for compatibility with the intended fuel type.
- Verify fuel pressure and regulator operation after installation.
- Check all fuel-system connections for leaks before operating the vehicle.
- Follow current TI Automotive/Walbro installation guidance applicable to the specific vehicle and fuel system.
- Professional installation is recommended when fuel module, wiring, or fuel-line modifications are required.
FREQUENTLY ASKED QUESTIONS
Is the Walbro F90000267 compatible with E85?
Yes. The F90000267 is designed for E85/flex-fuel applications and is also used with gasoline.
How much fuel does the F90000267 pump flow?
The Hawks listing specifies 465 LPH at 40 PSI and 13.5V in gasoline. Flow output changes depending on pressure, voltage, and fuel type.
Is the F90000267 a direct-fit fuel pump?
No universal direct-fit claim should be made. This is a universal-style in-tank performance pump, and installation compatibility depends on the specific vehicle's fuel module and fuel system.
What is the TI Automotive model number?
The F90000267 is also identified as the TIA485-2.
What is the maximum operating pressure?
Current product information identifies operation up to 87 PSI total fuel pressure.
What size is the outlet?
The outlet diameter is 10mm, or approximately 3/8 inch.
Does this pump work with gasoline?
Yes. The F90000267 is used with gasoline as well as E85 and compatible ethanol-blend applications.
Why is this pump sometimes called a 450LPH, 465LPH, or 485LPH pump?
Different sellers and references describe the F90000267 using different flow figures based on testing conditions and naming conventions. The Hawks listing's 465 LPH figure is specifically associated with 40 PSI and 13.5V in gasoline, while other references classify the TIA485-2 within a broader 450-485 LPH product family.
