Product Description:
Hawks Motorsports offers our clients this 1993 Chevrolet Camaro Z28 Indianapolis 500 Pace Car Door, Fender and Windshield Decal Kit, Phoenix Graphix 1993DD.
This replacement graphics package is designed for the limited-production 1993 Chevrolet Camaro Z28 Indianapolis 500 Pace Car Edition. It includes the prominent identification graphics used on the doors, front fenders and windshield area, allowing owners to replace faded, damaged, missing or previously removed factory-style Pace Car decals.
The package includes two large “Official Pace Car – 77th Indy 500” door graphics with their accompanying logos, two Indianapolis 500 fender decals and one Camaro windshield decal. Phoenix Graphix also includes an application squeegee and installation instructions.
This is the identification decal package only. It does not include the multicolor hood, bumper, body-side, rear compartment-lid, fuel-door or rear-body stripes supplied in the complete Phoenix Graphix 1993PC package.
Phoenix Graphix reports that only 645 customer-production examples of the 1993 Camaro Indianapolis 500 Pace Car Edition were manufactured. Replacing the correct model-specific identification graphics can help return one of these limited-production fourth-generation Camaros to its intended Pace Car appearance.
KEY FEATURES
- Five-piece Indianapolis 500 identification decal package
- Designed for the 1993 Chevrolet Camaro Z28 Indy 500 Pace Car Edition
- Reproduces the model-specific Pace Car door, fender and windshield graphics
- Includes graphics for both doors and both front fenders
- Includes one Camaro windshield decal
- Suitable for replacing faded, cracked, damaged or missing graphics
- Application squeegee included
- Installation instructions included
- Manufactured by Phoenix Graphix
- Phoenix Graphix part number 1993DD
KIT CONTENTS
- 2 Official Pace Car – 77th Indy 500 door decals with logos
- 2 Indianapolis 500 fender decals
- 1 Camaro windshield decal
- 1 application squeegee
- Installation instructions
FITMENT APPLICATIONS
1993 Chevrolet Camaro
- Camaro Z28 Indianapolis 500 Pace Car Edition
- Coupe
- Fourth-generation F-Body
This decal package may also be used when accurately recreating the 1993 Indianapolis 500 Pace Car appearance on a compatible 1993 Camaro. However, installation on a standard Camaro does not convert the vehicle into an authentic factory-produced Pace Car Edition.
IMPORTANT PRODUCT DISTINCTION
Phoenix Graphix 1993DD contains only the Pace Car identification decals:
- Door decals
- Fender decals
- Windshield decal
It does not include:
- Hood stripes
- Front bumper fascia stripes
- Body-side stripes
- Rear body-side stripes
- Rear compartment-lid stripe
- Fuel-door stripe
Customers needing all exterior stripes and identification decals should order the complete Phoenix Graphix 1993PC package instead.
INSTALLATION NOTES
Lay out and inspect every decal before beginning installation. Verify that all pieces are present, undamaged and correctly positioned for the intended side of the vehicle.
Install the decals indoors or in a shaded, clean, dust-free and wind-free environment. Phoenix Graphix recommends an application temperature between 70°F and 90°F and advises against applying automotive graphics in direct sunlight.
The painted surface must be thoroughly cleaned and free of wax, polish, silicone, grease, oil and other contaminants that could interfere with adhesion. Fresh paint should be allowed to cure for at least three days before installation.
Measure and establish reference points before removing the decal backing. Pay particular attention to matching the height, angle and fore-to-aft placement of the right- and left-side door and fender decals.
Professional installation is recommended for customers without previous experience applying large automotive graphics. Do not apply wax directly over the finished vinyl decals.
