BTR STAGE 4 TURBO CAMSHAFT V2 227/24X .618"/.618" 115 LSA The new BTR Turbo Stage 4 V2 cam was designed for use in serious effort stock stroke applications spinning over 8000rpm with supporting valvetrain components. For you folks who may have a ~408"...

BTR STAGE 3 TURBO CAMSHAFT V2 224/23X .618"/.618" 114 LSA The new BTR Turbo Stage 3 V2 cam was designed to bridge the gap between street and strip applications . The old Stage 3 had proven to be an excellent camshaft choice for cathedral port headed 5...

GM Ultra-Power Gen III/IV LS Cam Swap Install Bolt & Gasket Kit 5.3L 5.7L 6.0L 6.2L This cam swap gasket & bolt kit fits ALL GM Gen III & Gen IV LS-Series engines and our kit comes with everything needed for your quick cam swap! NOTE: WILL...

COMP Cams® introduces its first ever No Springs Required camshaft specifically designed for GM LS powered drift cars.The NSR Drift Camshaft is designed to provide a significant bolt-in power increase, with some applications gaining over 90 HP. Along...

Grind # XA236/365-XA244/355-12+3 ***3 Bolt, 5150 Core*** Hydraulic Roller Camshaft Maximum Street - Street/Strip - Race Duration at .050: 236/244 112 Lobe Center Angle with a 109 Intake Centerline Lift with 1.7 Rocker Arm Ratio: .621"/.604"Recommended...

  GM Performance 7.0L Factory LS7 Camshaft 211/230 .593"/.588" 121 LSA | 12638426   The LS7 camshaft is 211/230 @ .050 valve lift and .593"/.588" max lift with 1.8 rockers and a 121 lobe seperation. Lift with factory 1.7 rockers is .558"/...

HAWKS Donald Thump Cam LS1 LS2 LS6 | 236/241 .629"/.629" 111+2 LSA SPECS:Duration @ .050": 236 Intake / 241 ExhaustGross valve Lift: .629" Intake / .629" ExhaustLobe Separation Angle (LSA): 111°+2 NOTE: This is a 3 bolt cam, for models with a...

HAWKS CheatR Sleeper Cam Camshaft 5.3 6.0 LS1 LS2 | 215/230 .629"/.600" 117 LSA SPECS:Duration @ .050": 215 Intake / 230 ExhaustGross valve Lift: .629" Intake / .600" ExhaustLobe Separation Angle (LSA): 117°Overlap in Crank Degrees: -11°Intended...

TSP Stage 2 Low Lift Truck Cam Specs: 212/218, .550/.550 112 LSA This cam gained 51.4 HP and 22.9 TQ at the flywheel on our in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine! This cam uses proprietary TSP lobe profiles that are...

TSP Stage 4 High Lift Truck Cam Specs: 223/226 .600/.600 111 LSA This is an excellent performance camshaft with a noticeably lopey idle. This cam uses proprietary TSP lobe profiles that are designed to still utilize beehive valve springs, making them...

TSP Stage 3 High Lift Truck Cam Specs: 216/220 .600/.600 112 LSA This cam gained 67.1 HP and 26.8 TQ at the flywheel on our in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine! This cam uses proprietary TSP lobe profiles that are...

Cleetus McFarland "Bald Eagle" LS1/LS2 N/A Cam Specs: 227/234 .600"/.600" 111 LSA 109 ICL Purchase the naturally aspirated version of the camshaft that Cleetus McFarland is running in "Leroy", his savage C5 Corvette! The naturally aspirated version of...