Product Description:
Hawks Motorsports is pleased to offer our clients the following 134-2202 1993-1997 Camaro/Firebird LT1 6-Speed Pressure Plate Bolt Kit, Set of 6, ARP. This ARP High Performance pressure plate bolt kit is designed for Chevrolet LT1/LT4 applications and provides application-specific fasteners for securing the clutch pressure plate to the flywheel.
If you're putting together an LT1/T56 F-body drivetrain, this is the kind of small detail that deserves attention before the transmission goes back in. The clutch is taking the abuse every time you launch, shift hard, or lean on the throttle, so using purpose-built pressure plate fasteners is a smart part of putting the drivetrain together right. The ARP kit uses premium chromoly construction and a black oxide finish, with a 3/8"-16 thread and 180,000 psi nominal tensile strength.
The 134-2202 kit is sold as a set of six bolts and is intended for LT1/LT4 pressure plate applications. ARP identifies the fasteners as High Performance Series pressure plate bolts with an application-specific grip length.
For 1993-1997 Camaro and Firebird applications equipped with the LT1 and 6-speed manual transmission, these bolts are a direct part of the clutch installation hardware package. Verify the flywheel, pressure plate and drivetrain configuration before installation, particularly on vehicles that have been converted from another transmission or clutch configuration.
KEY FEATURES
- ARP part number: 134-2202
- ARP High Performance Series pressure plate bolts
- Designed for Chevrolet LT1/LT4 applications
- 1993-1997 Camaro and Firebird LT1 6-speed applications
- Set of 6 bolts
- 3/8"-16 thread
- Hex head design
- Premium chromoly construction
- Black oxide finish
- 180,000 psi nominal tensile strength
- Application-specific pressure plate fastener
- Underhead length: 1.615" / 41 mm
PRODUCT SPECIFICATIONS
Manufacturer: ARP
Part Number: 134-2202
Product Type: Clutch Pressure Plate Bolts
Series: High Performance
Material: Chromoly
Finish: Black Oxide
Head Style: Hex
Thread Size: 3/8"-16
Quantity: Set of 6
Nominal Tensile Strength: 180,000 psi
Underhead Length: 1.615" / 41 mm
Application: Chevrolet LT-series pressure plate applications
VEHICLE FITMENT / FITS THE FOLLOWING MODELS
Chevrolet Camaro
- 1993 Chevrolet Camaro LT1
- 1994 Chevrolet Camaro LT1
- 1995 Chevrolet Camaro LT1
- 1996 Chevrolet Camaro LT1
- 1997 Chevrolet Camaro LT1/LT4 SS 6-speed applications
Pontiac Firebird
- 1993 Pontiac Firebird LT1
- 1994 Pontiac Firebird LT1
- 1995 Pontiac Firebird LT1
- 1996 Pontiac Firebird LT1
- 1997 Pontiac Firebird LT1/LT4 Firehawk 6-speed applications
Verified F-Body Applications
The ARP application information supports 1993-1997 Camaro Z28/B4C/SS applications and 1993-1997 Firebird Formula, Trans Am and Firehawk applications, with specific 1997 LT4 6-speed applications identified separately.
IMPORTANT APPLICATION NOTES AND EXCLUSIONS
- Intended for Chevrolet LT1/LT4 pressure plate applications.
- Verify the vehicle's engine, transmission and clutch configuration before ordering.
- The F-body applications listed above are specifically associated with 6-speed manual applications.
- Do not assume fitment based solely on the vehicle year or model.
- Verify the pressure plate and flywheel configuration when dealing with a T56 conversion or aftermarket clutch assembly.
- This listing is for the 134-2202 pressure plate bolt kit; flywheel bolts and other clutch/transmission fasteners are separate components.
INSTALLATION NOTES
- Follow the current ARP installation and torque recommendations for the fasteners.
- Confirm the pressure plate and flywheel are the correct combination before installation.
- Clean and inspect the threaded holes and mating surfaces before assembly.
- Verify adequate fastener engagement before final torque.
- Tighten pressure plate fasteners according to the clutch manufacturer's recommended sequence and torque specifications.
- Rotate the assembly by hand after installation to verify proper clearance and free movement.
- Recheck the complete clutch installation before operating the vehicle.
- For modified or converted drivetrain combinations, verify application before final installation.
FREQUENTLY ASKED QUESTIONS
What is ARP 134-2202?
ARP 134-2202 is a High Performance Series pressure plate bolt kit designed for Chevrolet LT-series applications. It is supplied as a set of six 3/8"-16 chromoly pressure plate bolts.
Does 134-2202 fit a 1993-1997 Camaro LT1?
Yes. The application data supports 1993-1997 Chevrolet Camaro LT1 applications, including Z28 and related performance configurations. Verify the specific clutch and transmission combination before installation.
Does 134-2202 fit a 1993-1997 Firebird LT1?
Yes. The verified application information includes 1993-1997 Pontiac Firebird Formula, Trans Am and Firehawk applications.
How many bolts are included?
The ARP 134-2202 kit is sold as a set of six pressure plate bolts.
What size are the bolts?
The bolts use a 3/8"-16 thread and have a listed underhead length of approximately 1.615 inches.
What are the bolts made from?
ARP identifies the 134-2202 as a premium chromoly High Performance Series fastener with a nominal tensile strength of 180,000 psi.
What finish do the bolts have?
The 134-2202 uses a black oxide finish.
Is this the same as a flywheel bolt kit?
No. The 134-2202 is specifically a pressure plate bolt kit. Flywheel bolts are a separate application and should be selected according to the specific engine, flywheel and drivetrain combination.
