Product Description:
Hawks Motorsports is pleased to offer our clients the following.
This pair of new reproduction rear spring isolators renews the cushioned contact points for the coil springs in compatible 1993-2002 Chevrolet Camaro and Pontiac Firebird rear suspensions. Replacing hardened, split or missing isolators helps prevent direct spring-to-body contact and supports consistent spring seating.
| Feature | Product specification |
| Producer | Hawks Restoration Parts |
| Product type | rear coil spring isolator pair |
| Vehicle application | 1993-2002 Camaro / Firebird rear suspension |
| Original / application reference | Factory-style rear spring contact profile |
| Condition | New reproduction |
| Quantity | One pair |
- Two rear coil spring isolators
- Factory-style spring contact profiles
- Matched left- and right-side service pair
Cushioned Spring Contact
The isolators separate the coil springs from their factory contact surfaces and help limit transferred noise and abrasion.
Matched Pair
Both sides are serviced together for consistent spring seating.
Suspension Inspection
Check springs, seats, shocks, axle bushings and ride height while the rear suspension is safely unloaded.
| Year / application | Required configuration |
| 1993 Chevrolet Camaro / Pontiac Firebird | Factory-style rear coil spring suspension and matching spring seats |
| 1994 Chevrolet Camaro / Pontiac Firebird | Factory-style rear coil spring suspension and matching spring seats |
| 1995 Chevrolet Camaro / Pontiac Firebird | Factory-style rear coil spring suspension and matching spring seats |
| 1996 Chevrolet Camaro / Pontiac Firebird | Factory-style rear coil spring suspension and matching spring seats |
| 1997 Chevrolet Camaro / Pontiac Firebird | Factory-style rear coil spring suspension and matching spring seats |
| 1998 Chevrolet Camaro / Pontiac Firebird | Factory-style rear coil spring suspension and matching spring seats |
| 1999 Chevrolet Camaro / Pontiac Firebird | Factory-style rear coil spring suspension and matching spring seats |
| 2000 Chevrolet Camaro / Pontiac Firebird | Factory-style rear coil spring suspension and matching spring seats |
| 2001 Chevrolet Camaro / Pontiac Firebird | Factory-style rear coil spring suspension and matching spring seats |
| 2002 Chevrolet Camaro / Pontiac Firebird | Factory-style rear coil spring suspension and matching spring seats |
Model, trim and equipment availability can vary. Compare the original component, installation location and product photographs before ordering.
- Support the vehicle and rear axle using approved lift points.
- Relieve spring load with the correct suspension procedure.
- Record each spring and isolator orientation.
- Clean and inspect the spring contact surfaces.
- Seat each reproduction isolator fully before reinstalling the spring.
- Settle the suspension and verify ride height, seating and clearance.
How many isolators are supplied?
The package contains a matched pair for the rear suspension.
What symptoms can worn isolators produce?
Deteriorated pieces can allow noise, abrasion or uneven seating at the spring contact point.
Should spring condition be inspected during service?
Yes. Check both rear springs and their seats before reassembly.
Can a previously repaired vehicle differ from stock?
Yes. Compare the existing mounting area carefully when prior work is visible.
When should installation stop?
Stop if the component must be forced or the stated configuration does not match the vehicle.
