Product Description:
Hawks Motorsports is pleased to offer our clients the following 2014-2015 Chevrolet Camaro Z/28 LS7 7.0L 1-7/8" x 3" Stainless Steel Long Tube Headers by Kooks, part number 22512410.
The fifth-gen Z/28 is all about letting that naturally aspirated 7.0L LS7 do what it was born to do—rev hard and make serious power. When you're building around one of GM's nastiest production V8s, a proper set of long tubes is where the exhaust system starts getting serious. These 1-7/8-inch primary Kooks headers open up the path from the LS7 and provide a solid foundation for a purpose-built Z/28 exhaust combination.
Kooks part number 22512410 features 1-7/8-inch primary tubes, 3-inch collectors, 304 stainless steel construction, Torca SwivelSeal connections, and O2 extensions. These long tube headers do not connect directly to the OEM exhaust and require compatible Kooks connection pipes or a Kooks full exhaust system to complete the installation.
KEY FEATURES
- Kooks part number 22512410
- Fits 2014-2015 Chevrolet Camaro Z/28
- Designed for the 7.0L LS7 V8
- 1-7/8-inch primary tubes
- 3-inch collector configuration
- 304 stainless steel construction
- Long tube header design
- Torca SwivelSeal connections
- O2 extensions included
- Does not connect directly to the OEM exhaust
- Requires compatible Kooks connection pipes or a Kooks full exhaust system to complete the exhaust system
PRODUCT SPECIFICATIONS
| Specification | Details |
|---|---|
| Manufacturer | Kooks Headers & Exhaust |
| Part Number | 22512410 |
| Product Type | Long Tube Headers |
| Vehicle Application | 2014-2015 Chevrolet Camaro Z/28 |
| Engine | 7.0L LS7 V8 |
| Material | 304 Stainless Steel |
| Primary Tube Diameter | 1.875 in. / 1-7/8 in. |
| Collector Size | 3.000 in. |
| Connection Type | Torca SwivelSeal |
| O2 Extensions | Included |
| OEM Exhaust Connection | Does not connect directly |
| Required Exhaust Configuration | Compatible Kooks connection pipes or full exhaust system |
VEHICLE FITMENT / FITS THE FOLLOWING MODELS
- 2014 Chevrolet Camaro Z/28 — 7.0L LS7 V8
- 2015 Chevrolet Camaro Z/28 — 7.0L LS7 V8
Kooks identifies part number 22512410 for the 2014-2015 Chevrolet Camaro Z/28 equipped with the 7.0L LS7 engine.
IMPORTANT APPLICATION NOTES AND EXCLUSIONS
Requires Compatible Kooks Connection Pipes
These headers do not connect directly to the OEM exhaust. Kooks specifies the use of compatible Kooks connection pipes or a Kooks full exhaust system.
Exact Header Configuration
Part number 22512410 is the 1-7/8" x 3" header version for the Camaro Z/28 LS7.
Do not confuse it with:
- 22512410 — 1-7/8" x 3" long tube headers
- 22512610 — 2" x 3" long tube headers
These are separate header configurations for the same 2014-2015 Camaro Z/28 LS7 application.
Z/28-Specific Application
These headers are specifically listed for the 2014-2015 Camaro Z/28 with the 7.0L LS7 V8. Do not assume fitment on Camaro SS, ZL1, or other fifth-generation Camaro models.
California Emissions Restriction
These headers are not legal for sale, installation, or use on a licensed vehicle in California and do not meet CARB compliance. Customers should verify applicable federal, state, and local emissions regulations for their intended application.
INSTALLATION NOTES
- Confirm the vehicle is a 2014 or 2015 Chevrolet Camaro Z/28 equipped with the 7.0L LS7 V8.
- Verify that 22512410 is the desired 1-7/8-inch primary tube configuration.
- Select the appropriate compatible Kooks connection pipes or exhaust system.
- Follow the current Kooks installation instructions.
- Verify exhaust-system clearance before operating the vehicle.
- Inspect the completed system for exhaust leaks.
- Recheck the exhaust system after the initial heat cycles.
FREQUENTLY ASKED QUESTIONS
What vehicles do Kooks 22512410 headers fit?
Kooks part number 22512410 fits the 2014-2015 Chevrolet Camaro Z/28 equipped with the 7.0L LS7 V8.
What size are the primary tubes?
These headers use 1-7/8-inch (1.875-inch) primary tubes.
What size are the collectors?
Kooks identifies these as a 1-7/8" x 3" long tube header configuration with 3-inch collectors.
What material are Kooks 22512410 headers made from?
Kooks specifies 304 stainless steel construction.
Do these headers connect directly to the factory exhaust?
No. These headers do not connect directly to the OEM exhaust and require compatible Kooks connection pipes or a Kooks full exhaust system.
Are O2 extensions included?
Yes. Kooks identifies O2 extensions as part of the product configuration.
What is the difference between 22512410 and 22512610?
The primary difference is the primary tube diameter:
- 22512410: 1-7/8" x 3"
- 22512610: 2" x 3"
Both are long tube header configurations for the 2014-2015 Camaro Z/28 LS7, but they are separate part numbers and configurations.
Are these headers CARB compliant?
No. Current product information states these headers do not meet CARB compliance and are not legal for sale, installation, or use on licensed vehicles in California.
***Kooks is a built to order manufacturer and their focus is providing the best quality parts available. While their typical lead time is 4-6 weeks, some products may take up to 12 weeks to produce.***
