Product Description:
Hawks Motorsports is pleased to offer our clients this 2016-2024 Chevrolet Camaro Front Exterior Door Handle Bracket Driver or Passenger Side Used OEM GM. These original GM bracket assemblies mount and support the exterior door handle on the front doors of the sixth-generation Camaro. This general listing offers Driver Side, Passenger Side, or Both, with the correct GM part number identified by side. The current driver-side number is 13512723, which replaces 13509613, while the passenger-side bracket is 13512733, which replaces 13510308.
When you're rebuilding a Camaro door, this is one of those pieces you don't want to discover is bent, cracked, or missing after you've already got the handle halfway installed. The bracket is what gets the handle properly mounted to the door, so compare the old one, match the side, and make sure you're working with the right GM number. Get the hardware lined up, get the handle back where it belongs, and get her done.
KEY FEATURES
- Used OEM GM exterior door handle bracket
- Front door application
- Available Driver Side, Passenger Side, or Both
- Driver Side / Left: GM 13512723
- Driver Side Original: GM 13509613
- Passenger Side / Right: GM 13512733
- Passenger Side Original: GM 13510308
- Designed to align and secure the exterior door handle
- Sixth-generation Chevrolet Camaro application
- Coupe and convertible applications
- Genuine GM component
- Used condition
GM describes the exterior door handle bracket as the component that helps align and secure the vehicle's exterior door handle. The current passenger-side 13512733 is listed with mounting hardware included on the new GM service part; for these used Hawks assemblies, hardware inclusion should be determined from the actual inventory piece rather than assumed.
PRODUCT SPECIFICATIONS
- Manufacturer: General Motors
- Product Type: Front Exterior Door Handle Bracket Assembly
- Application: Chevrolet Camaro
- Model Years: 2016-2024
- Generation: Sixth Generation
- Position: Front Door
- Side: Driver or Passenger
- Driver Current GM Part Number: 13512723
- Driver Original GM Part Number: 13509613
- Passenger GM Part Number: 13512733
- Passenger Original GM Part Number: 13510308
- Material: Reinforced plastic for current passenger-side GM bracket
- Condition: Used OEM GM
- Quantity: 1 bracket
GM lists the current driver bracket 13512723 at approximately 1.00 lb and 14.6" × 5.6" × 3.6". The passenger 13512733 is listed at approximately 1.50 lb and 13.1" × 4.4" × 2.2" by GM parts catalog sources. These are product/catalog measurements, not guaranteed shipping-package measurements.
VEHICLE FITMENT
2016-2024 Chevrolet Camaro
GM catalog applications include:
- LS
- LT
- LT1
- SS
- ZL1
- 2.0L 4-cylinder
- 3.6L V6
- 6.2L V8
- Coupe
- Convertible
GM's current passenger-side 13512733 catalog specifically lists 2016-2024 Camaro across LS, LT, LT1, SS and ZL1 trims.
DRIVER SIDE / LEFT
Current GM: 13512723
Original GM: 13509613
GM catalogs 13509613 as the driver-side front exterior door handle bracket and identifies 13512723 as its replacement.
PASSENGER SIDE / RIGHT
Current GM: 13512733
Original GM: 13510308
GM catalogs 13512733 as the front passenger-side exterior door handle bracket.
IMPORTANT APPLICATION NOTES AND EXCLUSIONS
- This is a general side-selection listing.
- Select Driver Side, Passenger Side, or Both when ordering.
- 13512723 = Driver / Left
- 13512733 = Passenger / Right
- The original driver-side number 13509613 was replaced by 13512723.
- The passenger-side 13512733 replaces 13510308.
- Driver and passenger brackets are not interchangeable.
- 13521820 is the exterior door handle itself, not the bracket. GM catalogs 13521820 separately and lists a required quantity of two per vehicle.
- This listing is for the bracket/base assembly only unless additional components are specifically shown and included with the individual used inventory piece.
- Do not assume the used hardware shown in GM's new-part listing is included with a used Hawks assembly.
- Match the physical bracket and GM part number to the original component before ordering.
INSTALLATION NOTES
- Compare the replacement bracket with the original before installation.
- Verify driver/passenger side.
- Confirm mounting points and handle attachment points.
- Transfer components only when appropriate for the specific configuration.
- Follow the factory service procedure for exterior door-handle removal and installation.
- Make sure the bracket is securely mounted before installing the exterior handle.
- Test exterior handle operation and door-latch function before completing reassembly.
FREQUENTLY ASKED QUESTIONS
What is the GM part number for the driver-side bracket?
The current GM driver-side bracket is 13512723. The original number was 13509613, which GM lists as replaced by 13512723.
What is the GM part number for the passenger-side bracket?
The passenger-side bracket is 13512733. GM catalogs it as the front passenger-side door outside handle bracket.
Are the driver and passenger brackets the same?
No. They are separate side-specific assemblies with different GM part numbers.
Is 13521820 the door handle bracket?
No. 13521820 is the exterior door handle itself. The bracket/base is a separate component.
Will this fit a 2016-2024 Camaro?
The referenced GM bracket applications cover sixth-generation Camaro models through 2024, but the correct side and GM part number must still be matched.
Will this fit an SS or ZL1?
GM's catalog fitment for the passenger-side 13512733 includes SS and ZL1, as well as LS, LT and LT1.
Does this fit the Camaro convertible?
GM catalog information supports Camaro coupe and convertible applications for the relevant bracket assemblies.
Does this include the exterior door handle?
No. The exterior handle is a separate component. GM identifies 13521820 as the front exterior door handle.
Does this include mounting hardware?
Do not assume hardware is included with a used assembly. Check the actual photographs and inventory description for the specific piece being purchased.
