Product Description:
Hawks Motorsports is pleased to offer our clients the following.
Hawks Cheater Hydraulic-Roller Camshaft for LS1 / LS2 / LS6 engines. The Cheater grind is listed at 215/230 degrees duration at .050 inch, .629/.600-inch lift with 1.7:1 rockers, 117-degree LSA and 116-degree intake centerline. The source lists -11 degrees of overlap and an approximate 1,800-6,500-rpm range.

| Feature | Product specification |
|---|---|
| Condition | New |
| Duration at .050 inch | 215/230 degrees |
| Valve lift at 1.7:1 | .629/.600 inch |
| LSA / intake centerline | 117 / 116 degrees |
| Attachment | Three bolt |
| Application | LS1 / LS2 / LS6 engines |
| Hawks part number | HT-CHEATRCAM |

| Year | Vehicle | Required configuration |
|---|---|---|
| Configuration specific | LS1 / LS2 / LS6 engines | Compare the original part and selected order configuration |

- One Cheater camshaft

Factory-converter use depends on the full engine, gearing and calibration. The source dyno chart is one test combination and does not guarantee a fixed horsepower gain on another engine.

Have an LS engine builder verify the timing arrangement, valve springs, piston-to-valve clearance, pushrod length and required calibration. Match all supporting components; a single-bolt installation requires the correct three-bolt conversion where applicable.

What duration is listed?
215/230 degrees at .050 inch.
What rocker ratio underlies the lift?
1.7:1.
Is it a three-bolt cam?
Yes, as listed.
Is a horsepower increase guaranteed?
No. The chart represents a particular test combination.
Can stock-converter compatibility be assumed?
No. Confirm the complete combination with the tuner.