Hawks Motorsports proudly offers the BluePrint Engines PSLS37651CTFKB GM LS Compatible 376 C.I. Pro Series Engine, a complete high-performance LS crate engine package designed for builders looking for modern LS reliability, EFI simplicity, and an aggressive finished engine appearance. Delivering 525 horsepower and 460 lb-ft of torque, this Deluxe Dressed Pro Series engine combines BluePrint’s LS-based performance architecture with a Holley Terminator X Max EFI system, black pulley kit, and complete accessory package for a ready-to-install LS swap solution.

The PSLS37651CTFKB features a 376 cubic inch LS-compatible platform built around a BluePrint high-strength cast iron LSX-style block with reinforced structure, LS3-style aluminum cylinder heads, hydraulic roller camshaft, hypereutectic pistons, and a nodular iron crankshaft. This combination provides excellent street performance, durability, and compatibility for custom muscle car, restomod, and Pro Touring applications.

This Deluxe Dressed configuration includes a Holley Terminator X Max Gen IV complete ECU and wiring harness EFI system, allowing for simplified installation and advanced tuning capability. The engine also includes a black accessory pulley kit, providing a clean, modern appearance for custom engine bays.

With LS3-style cylinder heads, complete EFI control, and swap-ready accessories, the PSLS37651CTFKB is an excellent choice for Camaro, Corvette, Chevelle, C10, Firebird, GTO, G8, and other LS-powered custom builds.

Key Features:

• Part Number: PSLS37651CTFKB
• Manufacturer: BluePrint Engines
• GM LS Compatible Pro Series Engine
• 376 Cubic Inch Displacement
• 525 Horsepower
• 460 lb-ft Torque
• Deluxe Dressed Configuration
• Holley Terminator X Max Gen IV EFI System Included
• Complete ECU & Wiring Harness Included
• Black Pulley Kit Included
• LS3 Aluminum Cylinder Heads
• Hydraulic Roller Camshaft
• Hypereutectic Pistons
• Nodular Iron Crankshaft
• Forged Connecting Rods
• LSX-Style High Strength Cast Iron Block
• 10.7:1 Compression Ratio
• Fuel Injectors Included
• Fuel Rails Included
• Drive-By-Wire Throttle Body Included
• LS3-Style Intake Manifold Included
• LS Swap Oil Pan Included
• Water Pump Included
• Coil Packs Included
• Gas Pedal Included
• Harmonic Balancer Included
• Valve Covers Included
• Timing Cover Included

Engine Specifications:

General:

• Manufacturer: BluePrint Engines
• Part Number: PSLS37651CTFKB
• Engine Family: GM LS Compatible
• Series: Pro Series
• Configuration: Deluxe Dressed
• Displacement: 376 C.I. (6.2L)
• Horsepower: 525 HP
• Torque: 460 lb-ft
• Compression Ratio: 10.7:1
• Fuel System: Holley Terminator X Max EFI
• ECU/Harness: Included
• Fuel Recommendation: 91+ Octane

Block Specifications:

• BluePrint High Strength LSX-Style Cast Iron Block
• Bore: 4.066"
• Stroke: 3.622"
• 6-Bolt Main Design
• Priority Main Oiling System
• Reinforced Main Webbing
• Increased Deck Strength
• Extended Cylinder Skirt Design
• LS3 Front & Rear Cover Compatible
• 1-Piece Rear Main Seal

Rotating Assembly:

• Nodular Iron Crankshaft
• Stroke: 3.622"
• Connecting Rod Length: 6.125"
• Hypereutectic Pistons
• Forged Connecting Rods
• High Strength Rod Bolts
• Internally Balanced Assembly

Cylinder Heads:

• BluePrint LS3 Aluminum Cylinder Heads
• Chamber Size: 69cc
• Intake Valve: 2.165"
• Exhaust Valve: 1.590"
• Intake Runner: 259cc
• Exhaust Runner: 102cc

Camshaft Specifications:

• Hydraulic Roller Camshaft
• Three-Bolt Cam Design
• Intake Lift: .612"
• Exhaust Lift: .585"
• Duration @ .050:
  • Intake: 225°
  • Exhaust: 238°
• Lobe Separation Angle: 113°

EFI System:

Holley Terminator X Max Gen IV EFI System

Includes:

• Holley Terminator X Max ECU
• Complete Engine Wiring Harness
• Drive-By-Wire Controls
• EFI Management System
• BluePrint Engine-Specific Calibration

Benefits:

• Simplified LS swap wiring
• Modern EFI drivability
• Advanced tuning capability
• Compatible with performance applications

Note: BluePrint calibrates the ECU specifically for this engine package. Do not replace the supplied calibration with a generic Holley base map.

Accessory Drive:

Black Pulley Kit Included

Includes:

• LS2 Style Water Pump
• 140 Amp Alternator
• Peanut Style A/C Compressor
• Type II Power Steering Pump With Remote Reservoir
• Black Finish Accessory Components

Included Components:

Includes:

• Complete Deluxe Dressed Engine Assembly
• LS3 Aluminum Cylinder Heads
• LS3-Style Intake Manifold
• Holley Terminator X Max EFI System
• ECU & Wiring Harness
• Fuel Injectors
• Fuel Rails
• Drive-By-Wire Throttle Body
• Black Pulley Kit
• Water Pump
• LS Swap Oil Pan
• Valve Covers
• Coil Packs
• Gas Pedal
• Harmonic Balancer
• Timing Cover

Fitment Applications:

Compatible with custom LS-powered builds including:

• Chevrolet Camaro
• Chevrolet Corvette
• Chevrolet Chevelle
• Chevrolet Nova
• Chevrolet C10
• Chevrolet Silverado
• Pontiac Firebird
• Pontiac GTO
• Pontiac G8
• Chevrolet SS
• Street Rods
• Restomod Builds
• Pro Touring Vehicles
• LS Swap Applications
• Custom Muscle Cars

Always verify transmission compatibility, accessory clearance, hood clearance, fuel system requirements, and exhaust fitment before installation.

Installation Notes:

• Designed for custom LS swap applications.
• Includes complete Holley Terminator X Max EFI system.
• Requires compatible LS transmission setup.
• Requires non-weighted flexplate/flywheel.
• BluePrint recommends a 2200+ RPM stall converter for automatic transmission applications.
• Verify driveshaft, exhaust, and accessory clearance.
• Recommended fuel: 91+ octane.
• Professional installation and tuning recommended.