Product Description:
Hawks Motorsports offers our clients this 1974-1981 Camaro Firebird Trans Am Ginger Foam-Backed Perforated Vinyl Headliner Material, Material Only, Acme 74-1513P-FBH7.
This replacement headliner material is designed for recovering a structurally sound original or replacement headliner board. The Ginger color provides a warm golden-brown interior finish suitable for second-generation Camaro, Firebird, Formula and Trans Am restoration projects requiring a period-style tan or Ginger overhead interior.
The perforated vinyl face recreates the appearance commonly associated with factory-style GM headliners, while the attached foam backing provides the cushioned layer needed between the vinyl covering and the headliner board. It is an effective choice for replacing material that has become faded, torn, stained, loose or separated from its original foam backing.
This listing includes the foam-backed perforated vinyl headliner material only. The headliner board, sun visors, trim moldings, mounting hardware and installation adhesive are not included.
Key Features
- Acme replacement headliner material
- Ginger interior color
- Perforated vinyl face
- Attached foam backing
- Designed to recover an existing headliner board
- Helps replace loose, faded, torn or deteriorated material
- Suitable for factory-style and custom interior restoration
- May be trimmed during installation for the required application
- Material only
- Headliner board is not included
- Acme part number 74-1513P-FBH7
FITMENT APPLICATIONS
- 1974 Chevrolet Camaro
- 1975 Chevrolet Camaro
- 1976 Chevrolet Camaro
- 1977 Chevrolet Camaro
- 1978 Chevrolet Camaro
- 1979 Chevrolet Camaro
- 1980 Chevrolet Camaro
- 1981 Chevrolet Camaro
- 1974 Pontiac Firebird
- 1975 Pontiac Firebird
- 1976 Pontiac Firebird
- 1977 Pontiac Firebird
- 1978 Pontiac Firebird
- 1979 Pontiac Firebird
- 1980 Pontiac Firebird
- 1981 Pontiac Firebird
- 1974-1981 Pontiac Firebird Formula
- 1974-1981 Pontiac Trans Am
Fitment note: This is replacement covering material rather than a molded or pre-cut headliner board. Confirm that the existing board is reusable and verify the amount of material required for the vehicle’s roof configuration before installation.
INSTALLATION NOTES
Remove the headliner board from the vehicle before attempting to recover it. Carefully strip away the old covering, deteriorated foam and loose adhesive without damaging the board.
The board must be clean, dry and structurally sound. Repair cracks or damaged mounting areas before installing the replacement material.
Dry-fit and center the material before applying adhesive. Use a high-temperature automotive headliner adhesive compatible with foam-backed vinyl. Apply the material gradually from the center outward to reduce wrinkles, trapped air and uneven stretching.
Allow the adhesive to cure according to its instructions before trimming excess material or reinstalling the board. Professional installation is recommended when the original board is brittle, warped, cracked or previously repaired.
Actual material color may vary slightly because of screen settings, lighting and differences between new reproduction material and aged original interior components.
components.
