Product Description:
View the installation instructions for the 1982–1992 Chevrolet Camaro Standard-Mount Double-DIN Radio Bezel and Bracket Kit.
View Installation InstructionsOpens in a new tab. Print or save a copy for reference.
Install a compatible Double-DIN receiver above the factory HVAC controls in a 1982-1992 Chevrolet Camaro. This new aftermarket reverse-mount kit combines a black textured bezel, aluminum mounting brackets and angled spacers for repositioning the climate controls below the radio.
| Specification | Details |
|---|---|
| Producer | Starbuck Innovative Designs |
| Product type | Double-DIN Radio Bezel and Bracket Kit |
| Application | 1982-1992 Chevrolet Camaro |
| Condition | New aftermarket radio installation kit |
| Radio / HVAC layout | Radio above; HVAC controls below |
| Bezel construction | Injection molded; OEM-style textured finish |
| Radio brackets | Slotted aluminum |
| Radio opening | 3.985 x 7.11 inches |
| Receiver depth | Shallow chassis under 4.5 inches recommended |
| Year | Make and model | Required configuration |
|---|---|---|
| 1982 | Chevrolet Camaro | Conventional Camaro center dash; Berlinetta digital-dash models excluded |
| 1983 | Chevrolet Camaro | Conventional Camaro center dash; Berlinetta digital-dash models excluded |
| 1984 | Chevrolet Camaro | Conventional Camaro center dash; Berlinetta digital-dash models excluded |
| 1985 | Chevrolet Camaro | Conventional Camaro center dash; Berlinetta digital-dash models excluded |
| 1986 | Chevrolet Camaro | Conventional Camaro center dash; Berlinetta digital-dash models excluded |
| 1987 | Chevrolet Camaro | Conventional Camaro center dash; Berlinetta digital-dash models excluded |
| 1988 | Chevrolet Camaro | Conventional Camaro center dash; Berlinetta digital-dash models excluded |
| 1989 | Chevrolet Camaro | Conventional Camaro center dash; Berlinetta digital-dash models excluded |
| 1990 | Chevrolet Camaro | Conventional Camaro center dash; Berlinetta digital-dash models excluded |
| 1991 | Chevrolet Camaro | Conventional Camaro center dash; Berlinetta digital-dash models excluded |
| 1992 | Chevrolet Camaro | Conventional Camaro center dash; Berlinetta digital-dash models excluded |
Match the existing center-dash configuration before ordering. Camaro and Firebird dashboard layouts differ; this application is for the Camaro.
- One black injection-molded Double-DIN reverse-mount bezel
- Aluminum radio mounting brackets
- Angled HVAC relocation spacers
The upper opening provides the Double-DIN radio location; the lower opening accommodates the relocated factory HVAC control assembly. Angled spacers correct the control position after relocation. The manufacturer confirms an injection-molded bezel, resolving the older 3D-print wording on the Hawks page. Receiver depth and rear cable space must be checked together.
Test-fit the receiver, matching bezel, brackets and original HVAC assembly before final fastening. Check rear connectors, wiring, ducting and climate-control movement. Follow the receiver wiring instructions and verify all functions before reinstalling the trim.
Use a shallow receiver under 4.5 inches deep as recommended by the manufacturer. Some receiver configurations may require trimming or adjustment; complete the test fit before any permanent change.
What does reverse mount mean?
The radio occupies the upper opening, with the original HVAC controls repositioned below it.
Is the bezel 3D printed?
The manufacturer identifies this bezel as injection molded; the older 3D-print description should be removed.
What is the opening size?
The published radio opening measures 3.985 x 7.11 inches. Check the selected receiver face and chassis separately.
How deep should the radio be?
The manufacturer recommends a shallow receiver under 4.5 inches deep, with additional clearance for rear connectors.
Will it fit a Berlinetta digital dash?
The manufacturer excludes Berlinetta digital-dash models from the listed application.
