Product Description:
Hawks Motorsports is pleased to offer our clients the following.
This black powder-coated transmission crossmember supports a TR6060 manual transmission in 1984-1992 Camaro and Firebird LSx conversions. It is fitted around Hawks engine-mount kit geometry to place the transmission support within the third-generation F-Body chassis.
| Feature | Product specification |
| Producer | Hawks Motorsports |
| Product type | LSx swap transmission crossmember |
| Vehicle application | 1984-1992 Camaro / Firebird with LS engine and TR6060 manual |
| Original / application reference | Hawks engine-mount system geometry |
| Condition | New fabricated component |
| Quantity | One crossmember |
- One LSx / TR6060 transmission crossmember
- Black powder-coated finish
- Application-specific third-generation F-Body design
TR6060-Specific Design
The support geometry is intended for the TR6060 manual transmission case and mount position.
Hawks Mount-System Basis
Engine position follows Hawks motor-mount kit geometry; other systems must be measured independently.
Conversion Verification
Tunnel clearance, shifter location, driveshaft length, driveline angle and exhaust routing remain project-specific checks.
| Year / application | Required configuration |
| 1984 Chevrolet Camaro / Pontiac Firebird | LSx swap; TR6060 manual; Hawks engine-mount geometry |
| 1985 Chevrolet Camaro / Pontiac Firebird | LSx swap; TR6060 manual; Hawks engine-mount geometry |
| 1986 Chevrolet Camaro / Pontiac Firebird | LSx swap; TR6060 manual; Hawks engine-mount geometry |
| 1987 Chevrolet Camaro / Pontiac Firebird | LSx swap; TR6060 manual; Hawks engine-mount geometry |
| 1988 Chevrolet Camaro / Pontiac Firebird | LSx swap; TR6060 manual; Hawks engine-mount geometry |
| 1989 Chevrolet Camaro / Pontiac Firebird | LSx swap; TR6060 manual; Hawks engine-mount geometry |
| 1990 Chevrolet Camaro / Pontiac Firebird | LSx swap; TR6060 manual; Hawks engine-mount geometry |
| 1991 Chevrolet Camaro / Pontiac Firebird | LSx swap; TR6060 manual; Hawks engine-mount geometry |
| 1992 Chevrolet Camaro / Pontiac Firebird | LSx swap; TR6060 manual; Hawks engine-mount geometry |
Model, trim and equipment availability can vary. Compare the original component, installation location and product photographs before ordering.
- Mock up the LS engine and TR6060 in the chassis.
- Confirm the engine-mount system and transmission position.
- Support the transmission safely.
- Test-position the crossmember and check tunnel and exhaust clearance.
- Measure driveline angle and shifter alignment.
- Complete final tightening and recheck at ride height.
Which manual transmission is this version for?
It is designed for an LS swap using a TR6060.
Is it the same as the T56 crossmember?
No. Transmission case and mount positions vary, so select the version named for the installed gearbox.
What finish is applied?
Hawks identifies a black powder-coated finish.
How should the part be selected?
Use the exact vehicle equipment and the stated application details rather than body style alone.
Why inspect nearby components at the same time?
Wear or damage around the installation area can prevent the replacement from operating correctly.
