Product Description:
Hawks Motorsports is pleased to offer our clients the following.
This black powder-coated transmission crossmember supports a TR6060 manual in 1984-1992 Chevrolet Camaro and Pontiac Firebird Gen V LT conversions. The application-specific support is designed around Hawks engine-mount geometry and the transmission-mount position of the named gearbox.
| Feature | Product specification |
| Producer | Hawks Motorsports |
| Product type | Gen V LT swap transmission crossmember |
| Vehicle application | 1984-1992 Camaro / Firebird with Gen V LT engine and TR6060 manual |
| Original / application reference | Hawks engine-mount system geometry |
| Condition | New fabricated component |
| Quantity | One crossmember |
- One Gen V LT / TR6060 transmission crossmember
- Black powder-coated finish
- Application-specific third-generation F-Body design
TR6060-Specific Geometry
This crossmember is intended for the TR6060 manual case and mount position; other transmission versions use different support geometry.
Hawks Mount-System Basis
Engine position follows Hawks motor-mount kit geometry. Builds using another mount system require independent measurement before selection.
Swap Planning
Confirm tunnel and pan clearance, driveshaft length, driveline angle, shifter or linkage position, cooler-line routing when applicable, and exhaust space before final assembly.
| Year / application | Required configuration |
| 1984 Chevrolet Camaro / Pontiac Firebird | Gen V LT swap; TR6060 manual; Hawks engine-mount geometry |
| 1985 Chevrolet Camaro / Pontiac Firebird | Gen V LT swap; TR6060 manual; Hawks engine-mount geometry |
| 1986 Chevrolet Camaro / Pontiac Firebird | Gen V LT swap; TR6060 manual; Hawks engine-mount geometry |
| 1987 Chevrolet Camaro / Pontiac Firebird | Gen V LT swap; TR6060 manual; Hawks engine-mount geometry |
| 1988 Chevrolet Camaro / Pontiac Firebird | Gen V LT swap; TR6060 manual; Hawks engine-mount geometry |
| 1989 Chevrolet Camaro / Pontiac Firebird | Gen V LT swap; TR6060 manual; Hawks engine-mount geometry |
| 1990 Chevrolet Camaro / Pontiac Firebird | Gen V LT swap; TR6060 manual; Hawks engine-mount geometry |
| 1991 Chevrolet Camaro / Pontiac Firebird | Gen V LT swap; TR6060 manual; Hawks engine-mount geometry |
| 1992 Chevrolet Camaro / Pontiac Firebird | Gen V LT swap; TR6060 manual; Hawks engine-mount geometry |
Model, trim and equipment availability can vary. Compare the original component, installation location and product photographs before ordering.
- Mock up the Gen V LT engine and TR6060 in the chassis.
- Confirm the engine-mount system and transmission position.
- Support the transmission safely before removing any existing support.
- Test-position the crossmember and inspect tunnel, pan and exhaust clearance.
- Measure driveline angle, driveshaft length and shifter or linkage alignment.
- Complete final tightening and recheck clearances at ride height.
Which manual transmission is this crossmember designed for?
This version is configured for the TR6060 manual transmission.
Can another transmission version use the same crossmember?
Do not assume so. Hawks lists separate crossmembers because transmission cases and mount positions differ.
What should be measured during mock-up?
Check the transmission case, tunnel, pan, driveshaft, driveline angle, exhaust and control-system clearances.
Is professional installation always required?
Not always, but use a qualified technician whenever the work exceeds your tools or experience.
What should be checked after installation?
Verify alignment, clearance and the complete operating function before normal use.
