Product Description:
Hawks Motorsports is pleased to offer our clients this 1991-1992 Chevrolet Camaro Z28 17x9 Silver Wheel Individual from Hawks Restoration Parts, part number HT179Z28S-I. This reproduction wheel recreates the classic 1991-1992 Camaro Z28 appearance in a modern 17x9 size, featuring a silver finish, 5x4.75 bolt pattern, +12mm offset, and 5.5-inch backspacing. The corresponding HT179Z28S wheel is documented for 1982-1992 Camaro and Firebird applications.
This is the wheel for the third-gen build that needs to look right without looking like it rolled straight out of a parts catalog. The five-spoke Z28 styling keeps that unmistakable F-body attitude, while the 17x9 size gives the car a wider, more serious footprint. Whether you're replacing one wheel, building a complete set, or getting an old Z28 back on the road, this is a clean OEM-style look with a little more attitude. Get the tires mounted and get after it.
KEY FEATURES
- Hawks Restoration Parts reproduction wheel
- Individual wheel
- 17x9 wheel size
- Silver finish
- 1991-1992 Camaro Z28 styling
- Five-spoke Z28 design
- 5 x 4.75-inch bolt pattern
- +12mm offset
- 5.5-inch backspacing
- Approximately 28.4 lbs per wheel without center cap
- Designed for 1982-1992 Camaro and Firebird applications
- Front wheel spacer requirement documented for applicable third-generation F-body installations
- Commonly recommended tire size: 275/40R17
- Wheels-only configuration
- Center caps, lug nuts, lug nut caps and valve stems are separate unless specifically included
PRODUCT SPECIFICATIONS
- Manufacturer: Hawks Restoration Parts
- Product Type: Wheel
- Current Individual Part Number: HT179Z28S-I
- Related Wheel Set: HT179Z28S
- Wheel Size: 17x9
- Finish: Silver
- Style: 1991-1992 Camaro Z28
- Bolt Pattern: 5 x 4.75 inches
- Offset: +12mm
- Backspacing: 5.5 inches
- Approx. Wheel Weight: 28.4 lbs without center cap
- Quantity: 1 wheel
- Construction: One-piece cast aluminum, based on secondary marketplace specification
- Condition: New reproduction
The 17x9, +12mm, 5.5-inch backspacing and 28.4-lb specifications are documented through the current product data. The aluminum/one-piece-cast specification comes from secondary marketplace data and is therefore treated as supporting rather than primary manufacturer information.
VEHICLE FITMENT
Chevrolet Camaro
- 1982-1992 Chevrolet Camaro
- 1982-1992 Camaro Z28
- 1985-1990 Camaro IROC-Z
- 1989-1992 Camaro RS
Pontiac Firebird
- 1982-1992 Pontiac Firebird
- 1987-1992 Pontiac Formula
- 1982-1992 Pontiac Trans Am
Hawks' current HT179Z28S listing specifically identifies the wheel set for 1982-1992 Camaro and Firebird applications and provides individual-year fitment for these third-generation F-body applications.
IMPORTANT APPLICATION NOTES AND EXCLUSIONS
- This listing is for ONE individual wheel.
- The wheel is styled after the 1991-1992 Camaro Z28 wheel but is upsized to 17x9 from the original 16-inch appearance.
- The documented specifications are 5x4.75 bolt pattern, +12mm offset and 5.5-inch backspacing.
- Hawks/JEGS documentation identifies two front wheel spacers with the wheel package for proper third-generation F-body front fitment. Verify the exact requirements on the vehicle before installation.
- Final brake, suspension, tire and fender clearance should be verified on the individual vehicle.
- 275/40R17 is the commonly recommended tire size for this wheel package, but final tire selection should account for ride height, suspension setup and clearance.
- This individual wheels-only listing should not be assumed to include center caps, lug nuts, lug nut caps or valve stems.
INSTALLATION NOTES
- Test-fit the wheel before mounting the tire.
- Verify brake-caliper clearance.
- Check inner wheel, suspension and steering clearance.
- Verify tire-to-fender and wheel-opening clearance through suspension travel.
- Confirm front spacer requirements before final installation.
- Use lug nuts appropriate for the wheel and vehicle.
- Torque wheel hardware to the vehicle manufacturer's specification.
- If replacing one wheel, compare the existing wheel's dimensions, offset, backspacing and finish before ordering.
FREQUENTLY ASKED QUESTIONS
Is this listing for one wheel or a set of four?
This listing is for one individual 17x9 silver wheel.
What size is the wheel?
The wheel is 17x9.
What is the bolt pattern?
The bolt pattern is 5 x 4.75 inches.
What are the offset and backspacing?
The documented specifications are +12mm offset and 5.5-inch backspacing.
Will this fit a 1982-1992 Camaro?
The corresponding HT179Z28S wheel is listed for 1982-1992 Camaro applications. Vehicle-specific clearance should still be verified.
Will this fit a 1982-1992 Firebird?
Yes. Hawks lists the corresponding wheel for 1982-1992 Firebird applications.
Is this the original factory wheel size?
No. The wheel recreates the 1991-1992 Z28 appearance but is upsized to 17x9 from the original 16-inch wheel configuration.
What tire size is commonly recommended?
275/40R17 is the commonly recommended tire size listed for this 17x9 wheel package. Final sizing should be verified for the individual vehicle.
Does the individual wheel include a center cap?
No center cap should be assumed with this wheels-only individual listing.
Are lug nuts included?
No. This listing is for the individual wheel only.
Are front wheel spacers required?
The complete wheel package is documented as shipping with two front wheel spacers for proper third-generation F-body fitment. Verify spacer requirements for the specific vehicle before installation.
