Product Description:
Hawks Motorsports is pleased to offer our clients the following.
This accelerator-pedal service kit replaces the small bushings and retaining clip used at the pedal linkage on compatible 1993-2002 Chevrolet Camaro and Pontiac Firebird models. Renewing worn or missing pieces helps restore secure pedal attachment and smoother movement at the pivot connection.
| Feature | Product specification |
| Producer | Hawks Motorsports |
| Product type | Accelerator pedal bushing and clip kit |
| Vehicle application | 1993-2002 Camaro / Firebird |
| Reference | Factory-style service application |
| Condition | New replacement |
| Quantity | One service kit |
- Accelerator-pedal service bushings
- One retaining clip
- Application-specific small hardware kit
Pedal-Linkage Service
The kit addresses the wear points and retainer at the accelerator-pedal connection.
Inspect the Complete System
Pedal looseness can also result from a worn pedal arm, cable end, bracket or damaged mounting point.
Safety-Critical Check
After installation, verify full pedal travel and immediate return to idle before operating the vehicle.
| Year / application | Required configuration |
| 1993 Chevrolet Camaro / Pontiac Firebird | Factory-style accelerator-pedal linkage |
| 1994 Chevrolet Camaro / Pontiac Firebird | Factory-style accelerator-pedal linkage |
| 1995 Chevrolet Camaro / Pontiac Firebird | Factory-style accelerator-pedal linkage |
| 1996 Chevrolet Camaro / Pontiac Firebird | Factory-style accelerator-pedal linkage |
| 1997 Chevrolet Camaro / Pontiac Firebird | Factory-style accelerator-pedal linkage |
| 1998 Chevrolet Camaro / Pontiac Firebird | Factory-style accelerator-pedal linkage |
| 1999 Chevrolet Camaro / Pontiac Firebird | Factory-style accelerator-pedal linkage |
| 2000 Chevrolet Camaro / Pontiac Firebird | Factory-style accelerator-pedal linkage |
| 2001 Chevrolet Camaro / Pontiac Firebird | Factory-style accelerator-pedal linkage |
| 2002 Chevrolet Camaro / Pontiac Firebird | Factory-style accelerator-pedal linkage |
Model, trim and equipment availability can vary. Compare the original component, mounting location and product photographs before ordering.
- Disconnect the battery and secure the vehicle before working beneath the dashboard.
- Document the accelerator cable and pedal connection.
- Remove the retaining clip while controlling the linkage.
- Inspect the pedal arm, cable end and bracket for damage.
- Install the bushings and new clip in the correct order.
- Confirm smooth full travel and positive return to the idle stop before driving.
What area does this kit service?
It services the accelerator-pedal linkage connection with replacement bushings and a retaining clip.
Can it correct side-to-side pedal looseness?
It can correct play caused by worn or missing bushings, but the pedal arm, bracket and cable must also be inspected.
Is this an electronic throttle part?
No. It is hardware for the mechanical accelerator-pedal linkage used in the stated F-Body application.
What is the most important post-installation check?
Verify the pedal moves freely through full travel and returns immediately to the idle stop.
Should a damaged cable be reused?
No. A frayed, kinked or damaged accelerator cable requires separate replacement.
