Product Description:
Hawks Motorsports offers our clients this 1993-2002 Chevrolet Camaro Rear Fascia “CAMARO” Lettering Inlay Decal Set, Phoenix Graphix 9302CAM.
Designed to fit within the recessed or embossed “C-A-M-A-R-O” lettering on the rear fascia, this decal set adds a clean contrasting finish to the back of your fourth-generation Camaro. It is an excellent detail for a restored vehicle, refreshed driver or customized street car.
The set includes the individual letter decals needed to complete the CAMARO name across the rear fascia. Phoenix Graphix offers the lettering in several colors, allowing the owner to coordinate the decals with the vehicle’s paint, stripes, wheels or other exterior accents. An application squeegee and installation instructions are included.
Phoenix Graphix lists this rear-fascia lettering set for all 1993-2002 Chevrolet Camaros and identifies it as a complementary addition to several of its fourth-generation Camaro stripe and anniversary graphics packages.
KEY FEATURES
- Fits the embossed CAMARO lettering on the rear fascia
- Designed for 1993-2002 fourth-generation Chevrolet Camaros
- Includes individual C-A-M-A-R-O letter inlay decals
- Adds a contrasting or customized appearance to the rear bumper area
- Available in seven color choices
- Useful for restoration, replacement or exterior customization
- Application squeegee included
- Installation instructions included
- Manufactured by Phoenix Graphix
- Base manufacturer part number 9302CAM
- Selected color code is added to the base part number
KIT CONTENTS
- 1 complete C-A-M-A-R-O rear-fascia lettering set
- Individual inlay decal for each letter
- Application squeegee
- Installation instructions
Phoenix Graphix publishes this as a lettering set rather than a full Camaro emblem, stripe or body-graphics package.
AVAILABLE COLORS
- Hugger Orange
- Black
- White
- Silver
- Red
- Gold
- Chrome
Phoenix Graphix requires the appropriate color code to be added to part number 9302CAM when ordering.
FITMENT APPLICATIONS
1993-2002 Chevrolet Camaro
- Camaro
- Camaro RS
- Camaro Z28
- Camaro SS
- Coupe
- Convertible
Phoenix Graphix states that the set fits 1993-2002 Camaros. Verify that the vehicle retains the applicable embossed CAMARO rear-fascia lettering before installation.
IMPORTANT PRODUCT DISTINCTION
Phoenix Graphix 9302CAM is designed for the:
- Rear fascia
- Rear bumper CAMARO lettering
- Individual embossed C-A-M-A-R-O letter recesses
It is not designed for the:
- Front grille
- Front license-plate cover
- Door panels
- Windshield
- Hood or deck-lid stripes
The separate Phoenix Graphix 9802CAM1 set is intended for the embossed “Camaro” name on the front grille or license-plate cover of 1998-2002 models.
INSTALLATION NOTES
Test-fit and identify the correct position of every letter before removing the backing material.
Thoroughly clean the recessed lettering area to remove dirt, wax, polish, grease, silicone and detailing-product residue. The surface must be dry before the decals are installed.
Carefully center each decal inside its corresponding embossed letter. Apply light pressure initially so minor positioning corrections can be made, then press the decal firmly into place using the included squeegee.
Because these are individual letters, check the complete CAMARO name from several viewing angles before finalizing the installation. Proper positioning will help maintain consistent spacing and alignment across the rear fascia.
