Hawks Motorsports offers our clients this 200-2802 GM Small Block Chevy/Ford 2-Piece Rear Main 7/16" Flywheel Bolt Kit, 12-Point, ARP for compatible two-piece rear main seal engine applications. This ARP flywheel bolt kit is designed for GM Small Block Chevy and Ford applications using 7/16" flywheel/flexplate fasteners, providing a high-quality replacement for original-style hardware.

If you're putting together a small-block that's actually going to see some throttle, the flywheel bolts aren't the place to grab whatever hardware happens to be laying around the shop. The 200-2802 kit gives a fresh engine build the kind of ARP hardware you'd expect to see when the rest of the assembly has been carefully machined, balanced, and bolted together. The 12-point heads also make getting a socket on the bolts straightforward when you're working in the tight space around the rear of the crankshaft.

The 200-2802 kit is designed around compatible GM Small Block Chevy and Ford two-piece rear main seal applications. The kit includes six 7/16" flywheel bolts with washers and uses a 12-point head design. Always verify crankshaft, flywheel/flexplate, and bolt specifications before installation, especially when combining aftermarket rotating assemblies or transmission components.

KEY FEATURES:

• ARP part number 200-2802
• Flywheel bolt kit
• Designed for compatible GM Small Block Chevy and Ford applications
• Two-piece rear main seal engine applications
• 7/16" flywheel bolt size
• 12-point head design
• Six bolts included
• Washers included
• ARP high-performance engine fasteners
• Designed for flywheel or compatible flexplate installation
• Suitable for restoration, street, performance, and engine-build applications

FITMENT APPLICATIONS:

GM Small Block Chevy

• Compatible GM Small Block Chevy two-piece rear main seal applications using 7/16" flywheel/flexplate fasteners
• Common Gen I Small Block Chevy applications should be verified by crankshaft and flywheel configuration

Ford Small Block

• Compatible Ford Small Block applications using the specified 7/16" flywheel fastener configuration
• Verify engine generation, crankshaft flange, and flywheel/flexplate before ordering

Important Fitment Note:

This is a 7/16" flywheel bolt kit for two-piece rear main seal applications. Flywheel and flexplate bolt requirements can vary by engine generation, crankshaft, transmission, and flywheel/flexplate. Verify the exact fastener size and application before ordering.

INSTALLATION NOTES:

• Kit includes six flywheel bolts and washers.
• Verify flywheel or flexplate bolt-hole diameter and thread specification before installation.
• Verify crankshaft flange and flywheel/flexplate compatibility.
• Designed for compatible two-piece rear main seal applications.
• Do not assume fitment based solely on engine displacement.
• Clean and inspect crankshaft and flywheel/flexplate mounting surfaces before installation.
• Make sure all bolt holes are clean and free of debris.
• Use the appropriate ARP assembly lubricant and follow ARP's recommended torque procedure.
• Do not automatically substitute factory torque specifications when installing ARP fasteners.
• Use a calibrated torque wrench for final installation.
• Verify proper bolt engagement without bottoming the bolts in the crankshaft flange.
• Test-fit the hardware before final assembly.
• Verify fitment before installation when using aftermarket flywheels, flexplates, crankshafts, or rotating assemblies.