Product Description:
Hawks Motorsports offers our clients this 2010-2013 Chevrolet Camaro Factory-Inspired Hockey Side Stripe Decal Kit, Screaming Chicken 5th-1013-hockey.
Give your fifth-generation Camaro the appearance of the factory-inspired hockey graphics offered during the early fifth-generation model years. The stripe begins on the front nose, continues across the front fender and extends rearward along the door, emphasizing the Camaro’s long hood and sculpted side profile.
The kit includes matching nose, front-fender and door sections for both the driver and passenger sides. Each section is pre-cut at the nose-to-fender seam and door opening, allowing the graphics to be installed without cutting across the adjoining body-panel gaps.
Depending on the color selected, the graphics are manufactured from Hexis, KPMF, Avery or 3M automotive vinyl. The material features air-release backing, UV protection and pressure-sensitive adhesive for easier positioning and dependable exterior use.
KEY FEATURES
- Factory-inspired hockey stripe design
- Designed specifically for 2010-2013 Camaro body contours
- Begins on the front nose
- Continues across the front fenders
- Extends toward the rear of the doors
- Includes graphics for both sides of the vehicle
- Separate nose, front-fender and door sections
- Pre-cut at the nose-to-fender seams
- Pre-cut at the door openings
- No cutting or trimming required on factory body panels
- Air-release adhesive backing
- UV-protected automotive vinyl
- Pressure-sensitive adhesive
- Made-to-order stripe kit
The current Hawks Motorsports and Screaming Chicken listings confirm the body placement, included sections, both-side coverage and pre-cut design.
AVAILABLE COLOR OPTIONS
- Satin Black
- Gloss Black
- Gloss White
- Gloss Gold
- Silver Metallic
- Satin Dark Silver
- Gun Metal Metallic
- Dark Gray Metallic
- Gloss Red
- Gloss Dark Red
- Electric Blue
- Blue Metallic
- Gloss Purple
- Inferno Orange
- Hugger Orange
- Gloss Yellow
These selections were verified against the current Hawks Motorsports product options. Vinyl manufacturer and finish may vary according to the color selected.
FITMENT APPLICATIONS
- 2010 Chevrolet Camaro
- 2011 Chevrolet Camaro
- 2012 Chevrolet Camaro
- 2013 Chevrolet Camaro
The manufacturer identifies this kit as fitting all 2010-2013 Chevrolet Camaro models. Because the graphics are limited to the nose, front fenders and doors, no separate V6, V8, coupe or convertible configuration is listed.
Fitment should be verified before ordering for vehicles equipped with an aftermarket front fascia, replacement fenders, modified doors, wide-body panels or other altered exterior bodywork.
YEAR INTERCHANGE
The same hockey stripe kit fits the 2010, 2011, 2012 and 2013 Chevrolet Camaro.
This kit does not fit 2014-2015 Camaro models. The later cars use revised front-end contours and require the separate 2014-2015 hockey stripe pattern.
INSTALLATION NOTES
Professional installation is recommended. Thoroughly clean the nose, front fenders and doors before applying the graphics. Remove all wax, polish, grease, ceramic coating and other contaminants that could interfere with adhesive performance.
Test-position every section before removing the complete backing. Confirm that the driver- and passenger-side graphics match in height and angle and that the separate sections align consistently across the body-panel seams.
Install the nose, fender and door sections individually. Do not bridge the vinyl across the nose-to-fender seam or the door opening. Cutting or trimming should not be required when installed on unmodified factory body panels.
Vinyl colors may appear different depending on vehicle paint color, surrounding light and screen settings. Physical color samples are available when exact shade verification is important. These graphics are made to order and are non-returnable.
IMPORTANT PRODUCT DISTINCTION
Part number 5th-1013-hockey includes the factory-inspired side hockey stripe graphics only.
Included:
- Driver-side nose stripe
- Driver-side front-fender stripe
- Driver-side door stripe
- Passenger-side nose stripe
- Passenger-side front-fender stripe
- Passenger-side door stripe
All vinyl graphics use high quality vinyl - Hexis, KPMF, Avery or 3M depending on which color is selected. All vinyl has an air release backing, UV protection and pressure sensitive adhesive for an easier install and long life.
Colors will appear different depending what device your viewing this web site on, also on the color of the car the graphics are being installed on and in different lighting conditions. Email scfbody90@gmail.com for free color samples. You must provide your mailing address and which colors you would like. All stripe kits/vinyl graphics are non-returnable.
NOTE: THESE KITS ARE MADE TO ORDER AND ARE NON-RETURNABLE. PROFESSIONAL INSTALLATION IS RECOMMENDED. IF YOU ARE UNSURE OF YOUR COLOR CHOICE, A SAMPLE CAN BE SENT FOR VERIFICATION PRIOR TO PURCHASE.
