Product Description:
Hawks Motorsports offers our clients this 2016-2018 Chevrolet Camaro SS / LS / LT Pre-Cut Nose, Hood, Deck-Lid and Spoiler Rally Stripe Kit, Screaming Chicken 6th-1618-rally-stripes.
Give your sixth-generation Camaro a bold, factory-inspired appearance with this complete dual rally-stripe package. Inspired by the original rally graphics offered on the 2016-2018 Camaro SS, the design features two wide stripes separated by an approximately 4-inch center gap.
The graphics begin on the nose or front-bumper area, continue across the hood and resume on the rear deck lid and compatible rear spoiler. Each section is pre-cut for the selected factory-style hood, body and spoiler configuration. The stripes feature finished, rounded edges for a clean appearance without requiring the installer to hand-cut the outer perimeter.
Separate configurations are available for SS coupes, SS convertibles, LS or LT coupes with a rear lip spoiler, LS or LT coupes without a spoiler and LS or LT convertibles. Compatible Turbo and V6 applications are covered under the appropriate LS or LT configuration.
On SS models, the hood-vent components must be removed before installation. This allows the stripe sections to continue beneath the vent area without leaving an unnecessary exposed gap around the factory hood vent.
The vinyl manufacturer varies according to the selected color and may include Hexis, KPMF, Avery or 3M material. The supplied vinyl features air-release backing, UV protection and pressure-sensitive adhesive.
This is a vehicle-specific aftermarket graphics package. It is not a universal stripe kit and will not fit ZL1 or 1LE Camaros. Compatibility is not guaranteed with aftermarket hoods, replacement body panels or spoilers not represented by the available configuration choices.
These graphics are made to order and non-returnable. Professional installation is recommended.
KEY FEATURES
- Designed for 2016-2018 sixth-generation Chevrolet Camaro
- Factory-inspired SS-style dual rally-stripe design
- Two wide primary stripes
- Approximately 4-inch center gap
- Covers the nose or front-bumper area
- Includes matching hood stripes
- Includes matching rear deck-lid or trunk stripes
- Includes spoiler graphics when required by the selected configuration
- Pre-cut for the selected vehicle application
- Finished, rounded outer edges
- No routine perimeter trimming required on the correct application
- Coupe and convertible configurations available
- SS, LS and LT configurations available
- Compatible with applicable Turbo and V6 Camaro models
- Vehicle-specific design
- Not a universal stripe kit
- High-quality automotive vinyl
- Vinyl brand varies according to color
- Air-release adhesive backing
- UV-protected material
- Pressure-sensitive adhesive
- Multiple color options
- Made to order
- Non-returnable
- Professional installation recommended
- Manufactured by Screaming Chicken
PACKAGE CONTENTS
The selected kit includes the applicable pre-cut sections for:
- Two nose or front-bumper rally stripes
- Two hood rally stripes
- Two rear deck-lid or trunk rally stripes
- Matching rear-spoiler stripe sections when required by the selected vehicle configuration
The precise number and shape of the individual vinyl sections may vary according to the selected hood, body style and spoiler configuration.
Not Included
- Roof stripes
- Replacement hood vents
- Hood-vent mounting hardware
- Rear spoiler
- Complete hood
- Front fascia or bumper
- Installation tools
- Surface-preparation products
- Replacement emblems
- Custom sections for aftermarket body panels
- Professional installation labor
CURRENT HAWKS COLOR OPTIONS
Select one color before ordering:
- Satin Black
- Gloss Black
- Gloss White
- Gloss Gold
- Silver Metallic
- Satin Dark Silver
- Gun Metal Metallic
- Dark Gray Metallic
- Gloss Red
- Gloss Dark Red
- Electric Blue
- Blue Metallic
- Gloss Purple
- Inferno Orange
- Hugger Orange
- Gloss Yellow
Colors can appear different depending on the vehicle’s paint color, lighting conditions and the display used to view them. Request a physical color sample through Hawks Motorsports before ordering when an exact color comparison is important.
Do not assume Satin Black, Matte Black and Gloss Black are interchangeable finishes.
REQUIRED VEHICLE CONFIGURATION
Select the exact vehicle configuration before ordering:
- SS Coupe
- SS Convertible
- LS or LT Coupe with rear lip spoiler
- LS or LT Coupe with no rear spoiler
- LS or LT Convertible
The selected configuration determines the hood, rear deck-lid and spoiler sections supplied.
FITMENT APPLICATIONS
2016 Chevrolet Camaro
- LT coupe with compatible factory hood and spoiler configuration
- LT convertible with compatible factory hood and spoiler configuration
- SS coupe
- SS convertible
- Compatible Turbo and V6 LT applications
- Does not fit 1LE applications
2017 Chevrolet Camaro
- LS coupe with compatible factory hood and rear configuration
- LT coupe
- LT convertible
- SS coupe
- SS convertible
- Compatible Turbo and V6 applications
- Does not fit ZL1
- Does not fit V6 1LE or SS 1LE
2018 Chevrolet Camaro
- LS coupe with compatible factory hood and rear configuration
- LT coupe
- LT convertible
- SS coupe
- SS convertible
- Compatible Turbo and V6 applications
- Does not fit ZL1
- Does not fit V6 1LE or SS 1LE
IMPORTANT FITMENT CLARIFICATIONS
- Designed specifically for the 2016-2018 Camaro body.
- Does not fit the redesigned 2019-2024 front and rear body panels.
- Does not fit ZL1 models.
- Does not fit any 1LE application.
- The RS equipment package does not determine fitment by itself.
- An RS-equipped vehicle must use the configuration matching its underlying LS or LT body, hood and spoiler.
- SS applications require removal of the factory hood-vent components during installation.
- Select the exact coupe or convertible configuration.
- Select whether an LS or LT coupe has the factory-style rear lip spoiler.
- The SS and LS/LT kits are not interchangeable because of their different hood configurations.
- Convertible and coupe rear stripe sections are different.
- Factory and aftermarket spoilers may have different shapes and mounting locations.
- Fitment is not guaranteed with an aftermarket spoiler.
- Fitment is not guaranteed with an aftermarket or modified hood.
- Replacement body panels should be test-checked before the vinyl backing is removed.
- The kit is not universal and should not be trimmed extensively to fit an unsupported application.
NOTE: THESE KITS ARE MADE TO ORDER AND ARE NON-RETURNABLE. PROFESSIONAL INSTALLATION IS RECOMMENDED. IF YOU ARE UNSURE OF YOUR COLOR CHOICE, A SAMPLE CAN BE SENT FOR VERIFICATION PRIOR TO PURCHASE.
Colors will appear different depending what device your viewing this web site on, also on the color of the car the graphics are being installed on and in different lighting conditions. Email scfbody90@gmail.com for free color samples. You MUST provide your mailing address and which colors you would like. All stripe kits/vinyl graphics are non-returnable.
