Product Description:
Hawks Motorsports is pleased to offer our clients the following.
This lightweight wheel-lug kit combines ten M12 x 1.5 titanium 12-point lug nuts with ten shank-style aluminum spacers for compatible drag-wheel applications. Hawks lists the complete set at approximately 7 ounces, reducing rotating and unsprung mass compared with a conventional steel shank-lug set.
| Feature | Product specification |
| Producer | Hawks Motorsports |
| Product type | titanium shank-style wheel lug nut kit |
| Vehicle application | Compatible wheels using M12 x 1.5 studs and shank-style lug seats |
| Original / application reference | M12 x 1.5 thread; 12-point head; shank-style aluminum spacers |
| Condition | New performance hardware |
| Quantity | Ten lug nuts and ten spacers |
- Ten M12 x 1.5 titanium 12-point lug nuts
- Ten shank-style aluminum spacers
- One lightweight ten-position wheel-lug set
Wheel-Seat Compatibility
Selection depends on the wheel manufacturer’s required shank diameter, shank length, spacer geometry and seat design—not thread size alone.
Published Kit Weight
Hawks lists the ten-lug kit at approximately 7 ounces, compared with approximately 1 pound 5 ounces for a referenced standard Weld shank-lug set.
Service Verification
Confirm stud engagement, wheel thickness, socket clearance and the wheel manufacturer’s torque procedure before use.
| Year / application | Required configuration |
| M12 x 1.5 wheel-stud application | Compatible shank-style drag wheel; verify shank dimensions, spacer seat and required engagement |
Model, trim and equipment availability can vary. Compare the original component, installation location and product photographs before ordering.
- Confirm M12 x 1.5 stud thread and the exact wheel-seat specification.
- Inspect studs, wheel bores and seating surfaces for damage.
- Test one lug and spacer for shank clearance before installing the set.
- Start every lug by hand to protect the threads.
- Tighten in the wheel manufacturer’s sequence and stages.
- Recheck torque after the specified initial service interval.
Is M12 x 1.5 thread size enough to confirm fitment?
No. Shank diameter, length, spacer shape, wheel thickness and stud engagement must also match.
How many wheel positions does one kit service?
The package contains ten lug nuts and ten spacers.
What tool interface is used?
The titanium lug nuts use a 12-point head; verify socket clearance at the wheel.
Can a previously repaired vehicle differ from stock?
Yes. Compare the existing mounting area carefully when prior work is visible.
When should installation stop?
Stop if the component must be forced or the stated configuration does not match the vehicle.
