Product Description:
Hawks Motorsports offers our clients this 2010-2015 Chevrolet Camaro Waving American Flag Stars & Stripes Side Graphic Decal Kit, Screaming Chicken 5th-stars-stripes.
Give your fifth-generation Camaro a bold patriotic appearance with this stylized Stars & Stripes graphic inspired by a waving American flag. The kit includes one oversized graphic for the driver side and one mirrored graphic for the passenger side.
Each side graphic measures approximately 23 inches tall by 69 inches wide. Unlike application-specific side stripes that arrive pre-cut at every panel opening, these graphics are intentionally supplied as large, continuous pieces. This allows the installer to place the design primarily on the door or angle it across the rear quarter-panel area before trimming it around the selected door or wheel-opening edges.
Depending on the selected color or finish, the graphics are manufactured from Hexis, KPMF, Avery or 3M automotive vinyl. The published materials feature air-release backing, UV protection and pressure-sensitive adhesive for easier positioning and dependable exterior use.
These graphics are made to order and non-returnable. Because their final position and trim lines are determined during installation, professional installation is strongly recommended.
KEY FEATURES
- Designed for all 2010-2015 fifth-generation Chevrolet Camaro models
- Stylized Stars & Stripes design based on a waving American flag
- Includes matching driver- and passenger-side graphics
- Two oversized graphics in total
- Each graphic measures approximately 23 inches tall by 69 inches wide
- May be positioned primarily on the doors
- May be angled across the rear quarter-panel area
- Flexible positioning allows a custom installed appearance
- Intentionally supplied without fixed door or wheel-opening cuts
- Trimmed around the selected panel openings after positioning
- Available in multiple solid colors and specialty finishes
- Two-color red-and-blue configuration advertised by the manufacturer
- Vinyl brand varies according to selected color or finish
- Manufactured from Hexis, KPMF, Avery or 3M vinyl
- Air-release backing helps manage trapped air
- UV-protected material intended for exterior use
- Pressure-sensitive adhesive assists with positioning
- Fits coupe and convertible applications
- Fits the original 2010-2013 and restyled 2014-2015 fifth-generation body designs
- Made to order
- Non-returnable
- Professional installation recommended
- Produced by Screaming Chicken
- Hawks Motorsports part number 5th-stars-stripes
Package Contents
- One approximately 23 × 69-inch driver-side Stars & Stripes graphic
- One approximately 23 × 69-inch passenger-side Stars & Stripes graphic
Not included: Hood graphics, roof graphics, deck-lid graphics, pre-cut door-opening sections, installation squeegee, application fluid, cutting tools or professional installation.
CURRENT HAWKS COLOR OPTIONS
- Satin Black
- Gloss Black
- Gloss White
- Gloss Gold
- Silver Metallic
- Satin Dark Silver
- Gun Metal Metallic
- Dark Gray Metallic
- Gloss Red
- Gloss Dark Red
- Electric Blue
- Blue Metallic
- Gloss Purple
- Inferno Orange
- Hugger Orange
- Gloss Yellow
Color-Selector Correction
The manufacturer advertises the design in either a single color or a red-and-blue combination. The independently listed matching kit identifies that combination as:
- Electric Blue Stars with Gloss Red Stripes
Hawks’ current selector does not show this two-color configuration. Confirm present supplier availability before adding it as an ordering choice.
Hawks should also verify whether Satin Black is the correct supplier designation or whether the selector should read Matte Black, which is the terminology used in current manufacturer images.
Color appearance can vary according to lighting, vehicle paint color and display settings. Request a physical vinyl sample when the precise shade or contrast is important.
FITMENT APPLICATIONS
2010 Chevrolet Camaro
- Coupe
- LS
- LT
- RS-equipped applications
- SS
2011 Chevrolet Camaro
- Coupe
- Convertible
- LS
- LT
- RS-equipped applications
- SS
2012 Chevrolet Camaro
- Coupe
- Convertible
- LS
- LT
- RS-equipped applications
- SS
- ZL1
2013 Chevrolet Camaro
- Coupe
- Convertible
- LS
- LT
- RS-equipped applications
- SS
- 1LE
- ZL1
2014 Chevrolet Camaro
- Coupe
- Convertible
- LS
- LT
- RS-equipped applications
- SS
- 1LE
- ZL1
- Z/28
2015 Chevrolet Camaro
- Coupe
- Convertible
- LS
- LT
- RS-equipped applications
- SS
- 1LE
- ZL1
- Z/28
Important Fitment Clarifications
- Screaming Chicken lists the graphics for all 2010-2015 Camaro models without a trim-level restriction.
- There is no separate 2010-2013 or 2014-2015 configuration.
- There is no separate coupe or convertible configuration.
- The flexible trim-to-fit construction accommodates different placement choices.
- There was no regular-production 2010 Camaro convertible.
- The graphics are not pre-cut for door openings, wheel openings, emblems, side markers, body moldings or aftermarket accessories.
- Test-position the complete 23 × 69-inch footprint before installation.
- Vehicles with aftermarket rocker panels, side skirts, body moldings, repaired panels, paint-protection film or existing graphics require additional fitment planning.
- This kit is not intended for the redesigned 2016-and-newer sixth-generation Camaro.
- This is a custom aftermarket appearance product, not a reproduction of an original Chevrolet factory stripe package.
INSTALLATION NOTES
- Professional installation is strongly recommended.
- Inspect both graphics before beginning and confirm that one is intended for each side.
- Determine whether the design will be placed primarily on the doors or angled across the quarter panels.
- Test-position both full-size graphics before removing any backing.
- Measure from fixed body references so both sides are installed at matching heights and angles.
- Use low-tack masking tape to establish temporary reference points.
- Apply only to clean, dry, smooth and fully cured painted surfaces.
- Remove wax, grease, polish, ceramic-coating residue and other detailing products.
- Install indoors or in a shaded, clean, dust-free and wind-free environment.
- Follow the application method recommended for the specific vinyl supplied with the selected color.
- Do not assume that application fluid should be used merely because another vinyl kit permits wet installation.
- Avoid stretching the vinyl to correct alignment because stretching can distort the stars, stripes and outer profile.
- Work gradually across the large graphic while using the air-release channels to manage trapped air.
- Confirm final placement before trimming any opening.
- The graphics are designed to be trimmed around the selected door or wheel-opening edges after positioning.
- Protect the vehicle’s painted surface while trimming.
- Do not score or cut directly into the paint.
- Knifeless tape or installation by an experienced vinyl professional is recommended wherever practical.
- Carefully finish edges around panel openings to reduce lifting.
- Verify that door, wheel-opening and body-panel edges remain unobstructed.
- Allow the adhesive adequate time to bond before washing or applying detailing products.
- Confirm the selected color before ordering because the kit is made to order and non-returnable.
Colors will appear different depending what device your viewing this web site on, also on the color of the car the graphics are being installed on and in different lighting conditions. Email scfbody90@gmail.com for free color samples. You MUST provide your mailing address and which colors you would like. All stripe kits/vinyl graphics are non-returnable.
NOTE: THESE KITS ARE MADE TO ORDER AND ARE NON-RETURNABLE. PROFESSIONAL INSTALLATION IS RECOMMENDED. IF YOU ARE UNSURE OF YOUR COLOR CHOICE, A SAMPLE CAN BE SENT FOR VERIFICATION PRIOR TO PURCHASE.
