Product Description:
Hawks Motorsports offers our clients this 2010-2015 Chevrolet Camaro Tapered Legacy Full-Length Side Stripe Decal Kit with Lower Pinstripe, Screaming Chicken 5th-legacy-stripes.
Give your fifth-generation Camaro a distinctive front-to-rear profile with this Legacy side-stripe design. The main stripe remains narrow across the front-fender and door areas before gradually widening over the rear quarter panels. A narrow accent pinstripe follows the lower edge, adding definition without interrupting the continuous design.
The kit includes application-specific graphics for both sides of the Camaro. The stripes are pre-cut at the door openings, while the passenger-side graphics are also cut to accommodate the factory fuel-filler door. No cutting or trimming should be required during a standard installation on compatible factory-style body panels.
Depending on the selected color or finish, the graphics are manufactured from Hexis, KPMF, Avery or 3M automotive vinyl. Published material features include air-release backing, UV protection and pressure-sensitive adhesive for easier positioning and dependable exterior service.
Important: Hood stripes or hood spears are not included. This made-to-order graphic kit is non-returnable, so verify the selected color before ordering.
KEY FEATURES
- Designed for all 2010-2015 fifth-generation Chevrolet Camaro models
- Tapered full-length body-side design
- Narrower across the front-fender and door areas
- Gradually widens over the rear quarter panels
- Thin accent pinstripe follows the lower edge
- Continuous front-to-rear appearance without intentional design gaps
- Includes matching driver- and passenger-side graphics
- Pre-cut at the door openings
- Passenger side is pre-cut around the factory fuel-filler door
- No cutting or trimming required for a standard installation
- Automotive-grade vinyl selected according to color or finish
- Air-release backing helps reduce trapped air
- UV-protected material intended for exterior use
- Pressure-sensitive adhesive assists with positioning
- Available in multiple solid, matte, satin, metallic and specialty finishes
- Made to order
- Non-returnable
- Professional installation recommended
- Hood stripes and hood spears are not included
- Custom aftermarket appearance product
- Produced by Screaming Chicken
Package Contents
- Driver-side Legacy body-stripe sections
- Passenger-side Legacy body-stripe sections
- Passenger-side sections pre-cut for the fuel-filler door
- Installation instructions
Not included: Hood stripes, hood spears, installation tools, application fluid or professional installation.
FITMENT APPLICATIONS
Designed for the following Chevrolet Camaro applications:
- 2010 Chevrolet Camaro coupe
- 2011 Chevrolet Camaro coupe and convertible
- 2012 Chevrolet Camaro coupe and convertible
- 2013 Chevrolet Camaro coupe and convertible
- 2014 Chevrolet Camaro coupe and convertible
- 2015 Chevrolet Camaro coupe and convertible
The manufacturer lists this kit for all 2010-2015 Camaros without a trim-level restriction. Applications include compatible factory-bodied LS, LT, RS, SS, ZL1, 1LE and Z/28 models within the appropriate production years.
Important Fitment Clarification
The front and rear styling changes introduced for 2014 do not change the manufacturer’s published application. The Legacy side-stripe kit is specifically listed for the complete 2010-2015 fifth-generation Camaro range.
This kit is not intended for the redesigned 2016-and-newer sixth-generation Camaro.
INSTALLATION NOTES
- Professional installation is recommended because the stripe must remain aligned across several body panels.
- Read the supplied instructions completely before beginning.
- Identify and test-position every driver- and passenger-side section before removing the backing.
- Confirm that the stripe remains level and transitions evenly from the front fender through the door and rear quarter panel.
- Verify the door-opening and passenger fuel-door cuts before applying firm pressure.
- Install indoors or in a shaded, clean, dust-free and wind-free environment.
- Apply only to clean, dry, smooth and fully cured painted surfaces.
- Remove wax, grease, polish, ceramic-coating residue and detailing products from the installation area.
- Do not stretch the vinyl to correct alignment. Stretching can distort the tapered shape, lower pinstripe or fuel-door opening.
- Use a vinyl-application squeegee to apply even pressure and manage trapped air.
- Allow the adhesive adequate time to bond before washing the vehicle or applying detailing products.
- Carefully test-fit vehicles with replacement fenders, repaired quarter panels, aftermarket body panels or previous bodywork.
- Vinyl colors can appear different according to lighting, vehicle color and screen settings.
- Request a physical color sample when an exact match or contrast is important.
- Confirm the selected color before ordering because the graphics are made to order and non-returnable.
All stripe kits use high quality vinyl - Hexis, KPMF, Avery or 3M depending on which color is selected. All vinyl has an air release backing, UV protection and pressure sensitive adhesive for an easier install and long life. We install what we sell - install available at our Azle, Texas location.
Colors will appear different depending what device your viewing this web site on, also on the color of the car the graphics are being installed on and in different lighting conditions. Email scfbody90@gmail.com for free color samples. You MUST provide your mailing address and which colors you would like. All stripe kits/vinyl graphics are non-returnable.
NOTE: THESE KITS ARE MADE TO ORDER AND ARE NON-RETURNABLE. PROFESSIONAL INSTALLATION IS RECOMMENDED. IF YOU ARE UNSURE OF YOUR COLOR CHOICE, A SAMPLE CAN BE SENT FOR VERIFICATION PRIOR TO PURCHASE.
