Product Description:
Hawks Motorsports offers our clients this 2010-2015 Chevrolet Camaro Lower Body Accent Stripe Decal Kit, Screaming Chicken 5th-lower-body-accents.
Add a clean custom accent to the lower body lines of your fifth-generation Camaro. Each stripe begins on the front fender, crosses the lower portion of the door and continues slightly past the rear edge of the door. The graphics are pre-cut at the door opening for easier installation and a properly finished appearance.
The kit includes matching graphics for both the driver and passenger sides. It is manufactured from premium Hexis, KPMF, Avery or 3M automotive vinyl, depending on the selected color. Air-release backing, UV protection and pressure-sensitive adhesive help provide easier positioning and dependable exterior durability.
KEY FEATURES
- Follows the Camaro’s lower body line
- Starts on the front fender and extends slightly past the door
- Includes driver- and passenger-side graphics
- Pre-cut at the door openings
- No cutting between the fender and door sections required
- Multiple gloss, satin and metallic colors available
- Air-release adhesive backing
- UV-protected automotive-grade vinyl
- Pressure-sensitive adhesive
- Made-to-order stripe kit
AVAILABLE COLOR OPTIONS
- Satin Black
- Gloss Black
- Gloss White
- Gloss Gold
- Silver Metallic
- Satin Dark Silver
- Gun Metal Metallic
- Dark Gray Metallic
- Gloss Red
- Gloss Dark Red
- Electric Blue
- Blue Metallic
- Gloss Purple
- Inferno Orange
- Hugger Orange
- Gloss Yellow
The current color selections were verified against the Hawks Motorsports product options.
FITMENT APPLICATIONS
- 2010 Chevrolet Camaro
- 2011 Chevrolet Camaro
- 2012 Chevrolet Camaro
- 2013 Chevrolet Camaro
- 2014 Chevrolet Camaro
- 2015 Chevrolet Camaro
YEAR INTERCHANGE
The same stripe kit interchanges across the 2010, 2011, 2012, 2013, 2014 and 2015 Chevrolet Camaro model years. The manufacturer identifies the graphics as fitting all 2010-2015 Camaro models.
This kit is designed around factory fifth-generation Camaro fender and door contours. Fitment should be verified before ordering for vehicles equipped with aftermarket fenders, doors, rocker panels or custom body modifications.
INSTALLATION NOTES
Professional installation is recommended. Clean the front fenders, doors and adjoining lower body surfaces thoroughly before application. Remove all wax, polish, grease, ceramic coating and other contaminants that could prevent proper adhesion.
Test-position the graphics on both sides before allowing the adhesive to make full contact. Verify that the stripe height and body-line alignment match from the front fender through the door section.
Vinyl colors may appear different depending on vehicle paint, lighting conditions and screen settings. Request a physical color sample when an exact shade is important. These graphics are made to order and are non-returnable.
Colors will appear different depending what device your viewing this web site on, also on the color of the car the graphics are being installed on and in different lighting conditions. Email scfboby90@gmail.com for free color samples. You MUST provide your mailing address and which colors you would like. All stripe kits/vinyl graphics are non-returnable.
NOTE: THESE KITS ARE MADE TO ORDER AND ARE NON-RETURNABLE. PROFESSIONAL INSTALLATION IS RECOMMENDED. IF YOU ARE UNSURE OF YOUR COLOR CHOICE, A SAMPLE CAN BE SENT FOR VERIFICATION PRIOR TO PURCHASE.
