Product Description:
Hawks Motorsports offers our clients this 2010-2015 Chevrolet Camaro Full-Length Body-Line Side Spear Stripe Decal Kit, Screaming Chicken 5th-side-spears.
Give your fifth-generation Camaro a clean, uninterrupted side profile with these full-length side-spear graphics. The stripes begin at the front of the body line and continue through the front fenders, doors and rear quarter panels toward the rear bumper without intentional gaps in the design.
The kit includes matched graphics for both sides of the Camaro. Each side is pre-cut at the door opening, while the passenger-side graphics are also pre-cut for the fuel-filler door. This application-specific construction eliminates the need to cut or trim the vinyl across the vehicle’s major panel openings.
Depending on the selected color or finish, the graphics are produced from Hexis, KPMF, Avery or 3M automotive vinyl. Published material features include air-release backing, UV protection and pressure-sensitive adhesive for easier positioning and dependable exterior use.
Important: The standard kit includes the side graphics only. Coordinating hood spears are optional and are not included unless specifically selected. These graphics are made to order and are non-returnable, so confirm the color and hood configuration before ordering.
KEY FEATURES
- Designed for all 2010-2015 fifth-generation Chevrolet Camaro models
- Full-length spear design follows the upper body line
- Extends through the front-fender, door and rear-quarter-panel areas
- Creates a continuous front-to-rear appearance without intentional design gaps
- Includes matching driver- and passenger-side graphics
- Pre-cut at the door openings
- Passenger side is pre-cut for the fuel-filler door
- No cutting or trimming required during a standard installation
- Automotive-grade vinyl selected according to color and finish
- Air-release backing helps manage trapped air
- UV-protected material for exterior use
- Pressure-sensitive adhesive assists with positioning
- Multiple color, metallic and specialty-finish choices
- Optional application-specific hood spears available
- Made to order
- Non-returnable
- Professional installation recommended
- Custom appearance product; not represented as an original GM stripe package
Package Contents
- Driver-side front-fender stripe section
- Driver-side door stripe section
- Driver-side rear-quarter-panel stripe section
- Passenger-side front-fender stripe section
- Passenger-side door stripe section
- Passenger-side rear-quarter-panel graphics pre-cut for the fuel door
- Installation instructions
Not included with the standard kit: Hood spears, installation tools or professional installation.
FITMENT APPLICATIONS
Designed for the following Chevrolet Camaro applications:
- 2010 Chevrolet Camaro coupe
- 2011 Chevrolet Camaro coupe and convertible
- 2012 Chevrolet Camaro coupe and convertible
- 2013 Chevrolet Camaro coupe and convertible
- 2014 Chevrolet Camaro coupe and convertible
- 2015 Chevrolet Camaro coupe and convertible
The manufacturer lists the side-spear kit for all 2010-2015 Camaros without a trim-level restriction. This includes applicable LS, LT, RS, SS, ZL1, 1LE and Z/28 models retaining compatible factory-style exterior panels.
Important Hood-Spear Clarification
The optional hood spears must match the Camaro’s hood and model-year configuration. Published choices include:
- 2010-2013 Camaro SS
- 2014-2015 Camaro SS
- 2010-2015 V6 Camaro
The separately offered hood-spear design is not listed for the ZL1 hood. The side-spear kit itself remains manufacturer-listed for all 2010-2015 Camaros.
This kit is not intended for the redesigned 2016-and-newer sixth-generation Camaro.
INSTALLATION NOTES
- Professional installation is recommended because the graphics must remain aligned across several body panels.
- Read the supplied instructions completely before beginning.
- Identify and test-position every section before removing the backing.
- Use the Camaro’s upper body line and panel openings to maintain consistent front-to-rear alignment.
- Confirm that the door and passenger-side fuel-door cuts align correctly before applying firm pressure.
- Install in a clean, shaded, dust-free and wind-free environment.
- Apply only to clean, dry, smooth and fully cured painted surfaces.
- Remove wax, grease, polish, ceramic-coating residue and detailing products from the application area.
- Do not stretch the vinyl to correct alignment because stretching can distort the spear shape and create lifting at the panel edges.
- Use a proper vinyl application squeegee to apply even pressure and manage trapped air.
- Do not wash or apply detailing products over the graphics until the adhesive has had sufficient time to bond.
- Aftermarket body panels, repaired panels or existing graphics may affect alignment and should be test-fitted carefully.
- Vinyl appearance varies with vehicle color, lighting and screen settings. Request a physical sample when an exact color comparison is important.
- Verify the selected color and optional hood-spear application before ordering because made-to-order graphics are non-returnable.
All vinyl graphics use high quality vinyl - Hexis, KPMF, Avery or 3M depending on which color is selected. All vinyl has an air release backing, UV protection and pressure sensitive adhesive for an easier install and long life.
Colors will appear different depending what device your viewing this web site on, also on the color of the car the graphics are being installed on and in different lighting conditions. Email scfboby90@gmail.com for free color samples. You MUST provide your mailing address and which colors you would like. All stripe kits/vinyl graphics are non-returnable.
NOTE: THESE KITS ARE MADE TO ORDER AND ARE NON-RETURNABLE. PROFESSIONAL INSTALLATION IS RECOMMENDED. IF YOU ARE UNSURE OF YOUR COLOR CHOICE, A SAMPLE CAN BE SENT FOR VERIFICATION PRIOR TO PURCHASE.
