Product Description:
Hawks Motorsports is pleased to offer our clients the following.
Add 3 inches of height to the compatible factory spoiler on your 1982-1992 Chevrolet Camaro with this Race V2 wickerbill spoiler extension. The extension is made from gloss black abs body with a smoked / clear center-section design and mounts along the existing spoiler’s trailing edge. Mounting hardware is supplied as specified below.
| Feature | Specification |
|---|---|
| Brand / part number | Hawks Motorsports / HM8292WB.V2-RACE |
| Application | 1982-1992 Chevrolet Camaro |
| Version / height added | Race V2 / 3 inches |
| Material / finish | Gloss black ABS body with a smoked / clear center-section design |
| Required mounting profile | Standard three-piece factory spoiler; excludes curved convertible spoiler |
| Mounting hardware | Titanium mounting hardware; select Black, Silver or Gold |
| Condition / quantity | New aftermarket spoiler extension; one extension package |
| Surface protection | Removable protective film |
| Smoked-out insert | Optional selection; confirm chosen configuration |
| Installation tool | Optional add-on; select whether to include |
| Year | Make and model | Required spoiler / selection |
|---|---|---|
| 1982 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler; select no third-brake-light cutout |
| 1983 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler; select no third-brake-light cutout |
| 1984 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler; select no third-brake-light cutout |
| 1985 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler; select no third-brake-light cutout |
| 1986 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler; select no third-brake-light cutout |
| 1987 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler; select third-brake-light cutout |
| 1988 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler; select third-brake-light cutout |
| 1989 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler; select third-brake-light cutout |
| 1990 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler; select third-brake-light cutout |
| 1991 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler; select no third-brake-light cutout |
| 1992 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler; select no third-brake-light cutout |
Fitment note: Match the standard three-piece spoiler before ordering. The curved convertible spoiler is excluded. Inspect the actual spoiler and brake-light arrangement on cars with replacement or modified parts.
- One Race V2 wickerbill spoiler extension with removable protective film
- Titanium mounting hardware; select Black, Silver or Gold
Order selections: Add the Riv-Nut installation tool only when that option is selected. Add the smoked-out insert only when that option is selected. Choose the third-brake-light cutout that matches your installed spoiler.
This Race V2 version extends the rear spoiler vertically by 3 inches, changing the trailing-edge profile and appearance. It is an add-on for the specified existing spoiler. Select the correct third-brake-light cutout. A smoked-out insert is a separate order option.
The protective film helps prevent handling marks during trial fitting and installation. Keep it in place through mounting work and cleanup, then remove it before final assembly as directed in the guide.
Read the shared illustrated installation guide before drilling. It shows a Firebird example and states that the same installation steps apply across platforms. Match the actual extension, spoiler and mounting hardware before marking holes.
Open Installation PDF in a New Window
The PDF opens separately from this product page; your browser controls whether it uses a new tab or window.
- Protect the spoiler finish with painter’s tape and trial-fit the extension. Check its alignment and any third-brake-light opening before marking the first hole.
- Mark and drill one mounting position at a time. Check the required hole size against the selected inserts and the guide before enlarging the hole.
- For the recommended Riv-Nut method, use the correct adapter and seat each insert in the drilled spoiler. Temporarily secure the extension before locating the next mounting position.
- Repeat the alignment, drilling and fastening sequence for the remaining positions. Clean away drilling debris before removing the protective film.
- Complete the final installation with the fasteners snug. Avoid excessive force: the guide warns that overtightening can spin the Riv-Nut and damage the spoiler.
What height does the Race V2 add?
It adds 3 inches above the compatible factory rear spoiler.
How do I choose the brake-light cutout?
Select the cutout option that matches the installed spoiler: the listing associates a cutout with 1987–1990 and no cutout with 1982–1986 / 1991–1992. Inspect modified or replacement spoilers directly.
Is a smoked-out insert selectable?
Yes. It is a separate order option. The gallery shows configurations with and without the insert.
Which spoiler shape is required?
The standard three-piece Camaro spoiler. The curved convertible spoiler is excluded.
Are the installation tool and hardware finish selected separately?
Yes. Choose Black, Silver or Gold titanium hardware, and select whether to add the installation tool.
