Product Description:
Hawks Motorsports is pleased to offer our clients the following.
Add 3.5 inches of height to the compatible factory spoiler on your 1982-1992 Chevrolet Camaro with this Stealth V2 wickerbill spoiler extension. The extension is made from one-piece tinted / smoked abs plastic and mounts along the existing spoiler’s trailing edge. Mounting hardware is supplied as specified below.
| Feature | Specification |
|---|---|
| Brand / part number | Hawks Motorsports / HM8292WB.V2-STEALTH |
| Application | 1982-1992 Chevrolet Camaro |
| Version / height added | Stealth V2 / 3.5 inches |
| Material / finish | One-piece tinted / smoked ABS plastic |
| Published thickness | 0.185 inch |
| Required mounting profile | Standard three-piece factory spoiler; excludes curved convertible spoiler |
| Mounting hardware | Black titanium mounting hardware |
| Condition / quantity | New aftermarket spoiler extension; one extension package |
| Surface protection | Removable protective film |
| Installation tool | Optional add-on; select whether to include |
| Year | Make and model | Required spoiler / selection |
|---|---|---|
| 1982 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler |
| 1983 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler |
| 1984 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler |
| 1985 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler |
| 1986 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler |
| 1987 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler |
| 1988 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler |
| 1989 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler |
| 1990 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler |
| 1991 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler |
| 1992 | Chevrolet Camaro | Standard three-piece factory spoiler; excludes curved convertible spoiler |
Fitment note: Match the standard three-piece spoiler before ordering. The curved convertible spoiler is excluded. Inspect the actual spoiler and brake-light arrangement on cars with replacement or modified parts.
- One Stealth V2 wickerbill spoiler extension with removable protective film
- Black titanium mounting hardware
Order selections: Add the Riv-Nut installation tool only when that option is selected.
This Stealth V2 version extends the rear spoiler vertically by 3.5 inches, changing the trailing-edge profile and appearance. It is an add-on for the specified existing spoiler. One-piece smoked Stealth construction; it is not the multi-section Race design.
The protective film helps prevent handling marks during trial fitting and installation. Keep it in place through mounting work and cleanup, then remove it before final assembly as directed in the guide.
Read the shared illustrated installation guide before drilling. It shows a Firebird example and states that the same installation steps apply across platforms. Match the actual extension, spoiler and mounting hardware before marking holes.
Open Installation PDF in a New Window
The PDF opens separately from this product page; your browser controls whether it uses a new tab or window.
- Protect the spoiler finish with painter’s tape and trial-fit the extension. Check its alignment and any third-brake-light opening before marking the first hole.
- Mark and drill one mounting position at a time. Check the required hole size against the selected inserts and the guide before enlarging the hole.
- For the recommended Riv-Nut method, use the correct adapter and seat each insert in the drilled spoiler. Temporarily secure the extension before locating the next mounting position.
- Repeat the alignment, drilling and fastening sequence for the remaining positions. Clean away drilling debris before removing the protective film.
- Complete the final installation with the fasteners snug. Avoid excessive force: the guide warns that overtightening can spin the Riv-Nut and damage the spoiler.
How much height does this Stealth V2 add?
The published height increase is 3.5 inches above the compatible factory spoiler.
Is this a one-piece extension?
Yes. The Stealth V2 uses a single piece of tinted / smoked ABS plastic.
Will it fit the curved convertible spoiler?
No. The verified fit is the standard three-piece Camaro spoiler; the curved convertible spoiler is excluded.
Can I select silver or gold hardware for this SKU?
This Stealth listing specifies black titanium hardware. Its current selectable add-on is the installation tool.
Does the film stay on the finished extension?
No. It protects the panel during handling and fitting. Remove it after drilling and cleanup as directed in the guide.
