Product Description:
Hawks Motorsports is pleased to offer our clients the following: K&N High-Flow Original Lifetime Engine Air Filter for the 2016-2024 Chevrolet Camaro with the 6.2L V8 engine, part #33-5047.
Replace your Camaro’s disposable factory-style air filter with a washable and reusable K&N performance filter. Part #33-5047 installs directly inside the original air cleaner housing, allowing you to retain the factory intake system while upgrading to K&N’s layered, oiled cotton-gauze filter media.
The filter arrives pre-oiled and ready to install. Its vehicle-specific panel design fits the factory air box without requiring an aftermarket intake system or engine calibration.
K&N engineers its High-Flow Air Filters to provide improved airflow while capturing contaminants before they enter the engine. Four layers of treated cotton gauze create a reusable filtration surface designed for long-term street and performance use.
Key Features
- Washable and reusable K&N engine air filter
- Designed for 2016-2024 Chevrolet Camaro 6.2L V8 applications
- Direct replacement for the original panel-style air filter
- Installs inside the factory air cleaner housing
- Four layers of oiled cotton-gauze filter media
- Designed to improve airflow and support engine performance
- Pre-oiled and ready for installation
- Can be cleaned and re-oiled for continued use
- Service interval of up to 75,000 miles under normal highway-driving conditions
- No engine tuning or calibration required
- No-Hassle Lifetime Limited Warranty from K&N
- Sold individually
- K&N part #33-5047
Detailed Vehicle Fitment
This filter is designed for sixth-generation Chevrolet Camaro models equipped with a factory 6.2L V8 engine.
Applications include:
- 2016-2024 Chevrolet Camaro SS 6.2L V8
- 2017-2024 Chevrolet Camaro ZL1 6.2L supercharged V8
- 2020-2024 Chevrolet Camaro LT1 6.2L V8
Fits applicable coupe and convertible models using the compatible factory air cleaner assembly.
This filter is not intended for Camaro models equipped with the 2.0L turbocharged four-cylinder or 3.6L V6 engine. Always confirm the vehicle’s model year, trim, engine and original air-filter dimensions before ordering.
Product Specifications
- Brand: K&N
- Manufacturer part number: 33-5047
- Product type: Replacement engine air filter
- Filter shape: Panel
- Filter media: Oiled cotton gauze
- Filter color: Red
- Washable: Yes
- Reusable: Yes
- Filter height: 1.625 inches
- Outside length: 11.875 inches
- Outside width: 10.25 inches
- Filter weight: Approximately 2 pounds
- Recommended re-oiling amount: 2.1 ounces
- Quantity: One air filter
- Warranty: K&N No-Hassle Lifetime Limited Warranty
Replacement and Interchange References
K&N identifies part #33-5047 as a replacement option for the following filter and vehicle-manufacturer references:
- ACDelco A3223C
- Chevrolet 23323508
- Chevrolet 92276982
- Chevrolet A3223C
- Fram CA12376
- Purolator A49067
- WIX WA10560
- Service Champ WAF3223
- JS A0801
Interchange numbers are provided as shopping references. Confirm the dimensions and vehicle application before ordering.
Cleaning and Maintenance
K&N states that this filter may operate for up to 75,000 miles between cleanings under normal highway-driving conditions. Actual service intervals depend on road conditions, driving environment and vehicle use.
Vehicles regularly operated in dusty, sandy or off-road environments may require more frequent inspection and cleaning.
Use a cleaning and re-oiling system formulated for K&N oiled cotton air filters. Do not clean the filter with compressed air, gasoline, harsh solvents or a high-pressure washer. Allow the filter to dry naturally before applying the correct amount of filter oil.
Avoid over-oiling. Follow the current K&N cleaning and re-oiling instructions for best results.
Installation Notes
- Turn the engine off and allow the engine compartment to cool.
- Open the factory air-filter housing.
- Remove the existing engine air filter.
- Inspect the air box and remove loose dirt or debris without allowing contamination to enter the intake tract.
- Position K&N filter #33-5047 inside the factory air box.
- Confirm that the filter seal is seated evenly around the entire perimeter.
- Close and secure the factory air-filter housing.
- Inspect the installation to ensure the housing is fully closed before starting the engine.
Professional installation is generally unnecessary for this direct-replacement filter, but owners should follow the procedures in the vehicle service manual.
Frequently Asked Questions
Does K&N 33-5047 fit the 2016-2024 Camaro SS?
Yes. K&N lists part #33-5047 for 2016-2024 Chevrolet Camaro SS models equipped with the 6.2L V8 engine.
Does this filter also fit the Camaro ZL1?
Yes. It fits compatible 2017-2024 Camaro ZL1 models with the supercharged 6.2L V8 and original-style air cleaner assembly.
Does it fit the Camaro LT1 trim?
Yes. The filter fits applicable 2020-2024 Camaro LT1 models equipped with the 6.2L V8 engine.
Is this a complete cold-air intake system?
No. Part #33-5047 is a replacement panel air filter that installs inside the original Camaro air box. It does not replace the intake tube or factory air cleaner housing.
Is the filter supplied ready to install?
Yes. The filter is supplied pre-oiled and ready for installation.
Is this a dry air filter?
No. K&N 33-5047 uses oiled cotton-gauze media. It must be cleaned and re-oiled with products intended for K&N oiled filters.
Does installing this filter require an engine tune?
No. This replacement filter installs in the factory air box and does not require engine tuning or calibration.
How often should the filter be cleaned?
K&N currently recommends service at up to 75,000 miles under normal highway-driving conditions. Inspect it more frequently when driving in dusty or severe conditions.
Is the filter reusable?
Yes. It can be washed, dried, re-oiled and reused according to K&N’s maintenance instructions.
