Product Description:
Hawks Motorsports is pleased to offer our clients the following K&N DRYFLOW Cold Air Intake System for the 2016-2024 Chevrolet Camaro SS with the naturally aspirated 6.2L V8 engine, part #30-3092.
The K&N 30-3092 replaces the restrictive factory air-filter housing and intake tract with a performance-oriented system designed to reduce intake restriction, smooth airflow and deliver a larger volume of air to the engine. The system uses a black rotationally molded intake tube constructed from high-density cross-linked polyethylene.
A black K&N DRYFLOW filter provides oil-free synthetic filtration. Unlike an oiled cotton filter, the non-woven synthetic filter media does not require filter oil after cleaning. Under normal highway-driving conditions, K&N recommends servicing the filter at intervals of up to 50,000 miles. More frequent inspection and cleaning may be necessary in dusty or severe operating conditions.
K&N dynamometer testing recorded an estimated increase of 11.76 horsepower at 5,005 RPM and 25.85 lb-ft of torque at 3,000 RPM on a 2019 Chevrolet Camaro SS 6.2L. Actual results may vary depending on the vehicle, modifications, operating conditions and testing method.
In addition to reducing intake restriction, the system is designed to improve throttle response and produce a more noticeable engine-induction sound during acceleration.
Key Features
- Designed for the 2016-2024 Chevrolet Camaro SS
- Application-specific for the naturally aspirated 6.2L V8 engine
- Replaces the factory air-filter housing and intake tract
- Black K&N DRYFLOW oil-free air filter
- Non-woven synthetic filter media
- No filter oil required after cleaning
- Black rotationally molded intake tube
- High-density cross-linked polyethylene tube construction
- Designed to reduce intake restriction and straighten airflow
- Designed to improve throttle response and engine-induction sound
- Estimated gain of 11.76 horsepower at 5,005 RPM
- Estimated gain of 25.85 lb-ft of torque at 3,000 RPM
- Filter service interval of up to 50,000 miles under normal highway conditions
- Replacement filter part #RU-3101HBK
- K&N No-Hassle Lifetime Limited Warranty
- Current K&N part number 30-3092
Product Specifications
- Manufacturer: K&N
- Manufacturer part number: 30-3092
- Product type: Fuel-injection air-intake system with dry filter
- Filter series: K&N DRYFLOW
- Filter color: Black
- Filter material: Non-woven synthetic media
- Filter outlet shape: Round
- Replacement filter: RU-3101HBK
- Intake-tube color: Black
- Intake-tube material: High-density cross-linked polyethylene
- Tube manufacturing method: Rotationally molded
- Estimated horsepower gain: 11.76 HP at 5,005 RPM
- Estimated torque gain: 25.85 lb-ft at 3,000 RPM
- Product weight: Approximately 11.2 pounds
- Package dimensions: Approximately 24.1 x 15.5 x 14.5 inches
- Warranty: K&N No-Hassle Lifetime Limited Warranty
Fitment Applications
This intake system is designed for the following applications equipped with the naturally aspirated 6.2L V8 engine:
- 2016 Chevrolet Camaro SS Coupe
- 2016 Chevrolet Camaro SS Convertible
- 2017 Chevrolet Camaro SS Coupe
- 2017 Chevrolet Camaro SS Convertible
- 2018 Chevrolet Camaro SS Coupe
- 2018 Chevrolet Camaro SS Convertible
- 2019 Chevrolet Camaro SS Coupe
- 2019 Chevrolet Camaro SS Convertible
- 2020 Chevrolet Camaro SS Coupe
- 2020 Chevrolet Camaro SS Convertible
- 2021 Chevrolet Camaro SS Coupe
- 2021 Chevrolet Camaro SS Convertible
- 2022 Chevrolet Camaro SS Coupe
- 2022 Chevrolet Camaro SS Convertible
- 2023 Chevrolet Camaro SS Coupe
- 2023 Chevrolet Camaro SS Convertible
- 2024 Chevrolet Camaro SS Coupe
- 2024 Chevrolet Camaro SS Convertible
Important Fitment Information
This listing applies specifically to Camaro SS models equipped with the naturally aspirated 6.2L V8 engine.
Do not assume fitment for four-cylinder, V6, LT, LT1-trim, ZL1 or other Camaro applications based solely on the shared model year. Those applications may require a different intake system or part number.
K&N’s current application information does not identify a manual-versus-automatic transmission restriction for part #30-3092. Verify the vehicle’s year, SS trim and 6.2L engine before ordering.
Installation Notes
K&N states that installation can typically be completed in approximately 60 minutes or less using common hand tools.
Follow the current K&N installation instructions for part #30-3092. Carefully transfer and reconnect the required factory sensors, electrical connections and ventilation connections as directed in the manufacturer’s instructions.
Before starting the engine, confirm that the intake tube is properly aligned, all connections are secure and the filter is correctly positioned. After installation, start the engine and inspect for air leaks, unusual noises, warning lights or contact between the intake assembly and surrounding components.
Periodically inspect the intake system for proper alignment, clearance and secure connections. Inspect and clean the DRYFLOW filter more frequently when the vehicle is operated in dusty or severe conditions.
Emissions Notice
K&N currently identifies part #30-3092 as not legal for sale or use in California on any pollution-controlled motor vehicle. Check current state and local emissions regulations before ordering or installation.
Frequently Asked Questions
What vehicles does K&N part #30-3092 fit?
It is designed for 2016-2024 Chevrolet Camaro SS coupe and convertible models equipped with the naturally aspirated 6.2L V8 engine.
Will this intake fit a Camaro ZL1?
This listing is not for the supercharged Camaro ZL1. The ZL1 uses a different intake application.
Will it fit a four-cylinder or V6 Camaro?
No. Part #30-3092 is listed for the Camaro SS with the 6.2L V8 engine. Four-cylinder and V6 models require application-specific intake systems.
Will this fit a Camaro with an automatic transmission?
K&N’s current application data does not state a transmission restriction for part #30-3092. Fitment is based on the 2016-2024 Camaro SS and its 6.2L V8 engine.
Does the K&N DRYFLOW filter require oil?
No. The black DRYFLOW filter uses oil-free, non-woven synthetic filter media and does not require filter oil after cleaning.
Is the air filter washable and reusable?
The DRYFLOW filter is serviceable and designed for repeated use. Follow K&N’s cleaning instructions for synthetic DRYFLOW filters and do not apply filter oil.
How often should the filter be cleaned?
K&N recommends a service interval of up to 50,000 miles under normal highway-driving conditions. Inspect and clean it more frequently in dusty or severe operating environments.
What is the replacement filter part number?
The replacement K&N DRYFLOW filter is part #RU-3101HBK.
What material is the intake tube?
The black intake tube is manufactured from high-density cross-linked polyethylene using a rotational-molding process.
How much power does this system add?
K&N recorded an estimated gain of 11.76 horsepower at 5,005 RPM and 25.85 lb-ft of torque at 3,000 RPM on a 2019 Camaro SS 6.2L. Results will vary between vehicles.
Does this intake require an engine tune?
K&N does not list a separate engine calibration as an installation requirement for this system. Follow the current K&N instructions and verify that the vehicle operates correctly after installation.
Does this intake change the engine sound?
Yes. K&N designed the system to produce a more noticeable engine-induction sound, particularly during acceleration.
How long does installation take?
K&N states that installation can typically be completed in approximately 60 minutes or less using common hand tools.
Is this intake legal for use in California?
No. K&N currently identifies part #30-3092 as not legal for sale or use in California on any pollution-controlled motor vehicle.
What warranty is provided?
K&N lists part #30-3092 with its No-Hassle Lifetime Limited Warranty. Warranty eligibility and coverage remain subject to K&N’s current written warranty terms.
